Influence of Low Pressure during Catalytic Methanation by Nickel Based Catalyst

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F60461373%3A22320%2F19%3A43917951" target="_blank" >RIV/60461373:22320/19:43917951 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Influence of Low Pressure during Catalytic Methanation by Nickel Based Catalyst

Popis výsledku v původním jazyce

An increasing concentration of carbon dioxide in the atmosphere is the driving force of on its utilization in different technological processes. Those processes are CCS (Carbon Capture and Storage) and in particular in CCU (Carbon Capture and Utilization). One of the promising CCU processes is the catalytic methanation of carbon dioxide and hydrogen. The catalytic methanation utilizes hydrogen, which can be produced using sustainable renewable energy (wind or solar) with unsteady power production. The main product of the catalytic methanation is a synthetic natural gas, consisting mainly of methane. The synthetic natural gas can be used as a substitute for natural gas in energetic applications. This paper presents results from testing of nickel catalyst (Ni/γ-Al2O3) with a variable mass fraction of nickel. Methanation reaction was tested at temperatures below 450 °C and gauge pressure of 0.5 MPa in a through-flow reactor, with a stoichiometric mixture of hydrogen and carbon dioxide. During experiments, catalytic activity, methane selectivity, hydrogen and carbon dioxide conversion were measured.

Název v anglickém jazyce

Influence of Low Pressure during Catalytic Methanation by Nickel Based Catalyst

Popis výsledku anglicky

An increasing concentration of carbon dioxide in the atmosphere is the driving force of on its utilization in different technological processes. Those processes are CCS (Carbon Capture and Storage) and in particular in CCU (Carbon Capture and Utilization). One of the promising CCU processes is the catalytic methanation of carbon dioxide and hydrogen. The catalytic methanation utilizes hydrogen, which can be produced using sustainable renewable energy (wind or solar) with unsteady power production. The main product of the catalytic methanation is a synthetic natural gas, consisting mainly of methane. The synthetic natural gas can be used as a substitute for natural gas in energetic applications. This paper presents results from testing of nickel catalyst (Ni/γ-Al2O3) with a variable mass fraction of nickel. Methanation reaction was tested at temperatures below 450 °C and gauge pressure of 0.5 MPa in a through-flow reactor, with a stoichiometric mixture of hydrogen and carbon dioxide. During experiments, catalytic activity, methane selectivity, hydrogen and carbon dioxide conversion were measured.

Druh

O - Ostatní výsledky

CEP obor

—

OECD FORD obor

20704 - Energy and fuels

Projekt

<a href="/cs/project/TH02020767" target="_blank" >TH02020767: Methanizace oxidu uhličitého v bioplynu</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2019

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů