Temperature field evolution in wood samples during the flame spread experiments
Identifikátory výsledku
Kód výsledku v IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F60461373%3A22340%2F14%3A43897971" target="_blank" >RIV/60461373:22340/14:43897971 - isvavai.cz</a>
Výsledek na webu
<a href="http://dx.doi.org/10.2478/tvsbses-2014-0003" target="_blank" >http://dx.doi.org/10.2478/tvsbses-2014-0003</a>
DOI - Digital Object Identifier
<a href="http://dx.doi.org/10.2478/tvsbses-2014-0003" target="_blank" >10.2478/tvsbses-2014-0003</a>
Alternativní jazyky
Jazyk výsledku
angličtina
Název v původním jazyce
Temperature field evolution in wood samples during the flame spread experiments
Popis výsledku v původním jazyce
Vertical, horizontal and 45° upward flame spread experiments over the small scale beech and pine wood samples were performed. Wood samples were of two geometries - square cross section prisms (15 x 15 mm) and a thin rectangular cross section prisms (5 x40 mm) - and of three different lengths - 10, 15 and 30 cm. Samples were ignited by a heptane source fire extinguished immediately when the wood samples ignited. During the flame spread an internal temperature profiles along the centreline of the sampleswere measured by a set of thermocouples. Flame spread was observed in all sample positions except the horizontal orientation of the beech and pine square prism samples. Experimental data will serve for a validation of the pyrolysis models in the Computational Fluid Dynamics (CFD) flame spread models.
Název v anglickém jazyce
Temperature field evolution in wood samples during the flame spread experiments
Popis výsledku anglicky
Vertical, horizontal and 45° upward flame spread experiments over the small scale beech and pine wood samples were performed. Wood samples were of two geometries - square cross section prisms (15 x 15 mm) and a thin rectangular cross section prisms (5 x40 mm) - and of three different lengths - 10, 15 and 30 cm. Samples were ignited by a heptane source fire extinguished immediately when the wood samples ignited. During the flame spread an internal temperature profiles along the centreline of the sampleswere measured by a set of thermocouples. Flame spread was observed in all sample positions except the horizontal orientation of the beech and pine square prism samples. Experimental data will serve for a validation of the pyrolysis models in the Computational Fluid Dynamics (CFD) flame spread models.
Klasifikace
Druh
J<sub>x</sub> - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)
CEP obor
JM - Inženýrské stavitelství
OECD FORD obor
—
Návaznosti výsledku
Projekt
—
Návaznosti
S - Specificky vyzkum na vysokych skolach
Ostatní
Rok uplatnění
2014
Kód důvěrnosti údajů
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů
Údaje specifické pro druh výsledku
Název periodika
Sborník Vysoké školy báňské - Technické univerzity Ostrava, Řada bezpečnostního inženýrství
ISSN
1801-1764
e-ISSN
—
Svazek periodika
9
Číslo periodika v rámci svazku
1
Stát vydavatele periodika
CZ - Česká republika
Počet stran výsledku
9
Strana od-do
16-24
Kód UT WoS článku
—
EID výsledku v databázi Scopus
—