Influence of the Growth Parameters on RF-Sputtered CNTs and Their Temperature-Selective Application in Gas Sensors
Identifikátory výsledku
Kód výsledku v IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F60461373%3A22340%2F25%3A43932967" target="_blank" >RIV/60461373:22340/25:43932967 - isvavai.cz</a>
Výsledek na webu
<a href="https://pubs.acs.org/doi/10.1021/acsomega.5c03699?ref=pdf" target="_blank" >https://pubs.acs.org/doi/10.1021/acsomega.5c03699?ref=pdf</a>
DOI - Digital Object Identifier
<a href="http://dx.doi.org/10.1021/acsomega.5c03699" target="_blank" >10.1021/acsomega.5c03699</a>
Alternativní jazyky
Jazyk výsledku
angličtina
Název v původním jazyce
Influence of the Growth Parameters on RF-Sputtered CNTs and Their Temperature-Selective Application in Gas Sensors
Popis výsledku v původním jazyce
This work deals with the peculiarities of the growth of carbon nanotubes (CNTs) by radiofrequency (RF) magnetron sputtering and with the effect of deposition parameters on the RF sputtering. In the deposition process, a type of plasma gas, power of the RF generator, deposition time of catalysts, and a type of catalyst metals were modified to reveal the impact of these changes on the CNT's growth. The obtained nanostructures were studied by scanning electron microscopy (SEM) and transmission electron microscopy (TEM) as well as energy-dispersive X-ray (EDX) and Raman spectroscopies. The best results were obtained when the deposition conditions were as follows: argon-assisted plasma, generator power 120 W, catalyst sputtering duration 20 s, and nickel serving as a catalyst. A flexible propylene glycol vapor (PGV) and hydrogen peroxide vapor (HPV) sensors based on RF-sputtered CNTs combined with the Fe2O3:ZnO material were fabricated, and its DC and AC gas-sensing properties were studied. Impedance spectroscopy was used to evaluate an equivalent electrical circuit of the sensor. Temperature modulation led to the effective use of the same nanostructured film for PGV and HPV detection at 150 and 50 degrees C, respectively. At 50 degrees C temperature, the sensor response ranged from 3 to 27 values in the HPV concentrations of 0.5-25 ppm, respectively, demonstrating short response/recovery times, high response repeatability, and temporal stability.
Název v anglickém jazyce
Influence of the Growth Parameters on RF-Sputtered CNTs and Their Temperature-Selective Application in Gas Sensors
Popis výsledku anglicky
This work deals with the peculiarities of the growth of carbon nanotubes (CNTs) by radiofrequency (RF) magnetron sputtering and with the effect of deposition parameters on the RF sputtering. In the deposition process, a type of plasma gas, power of the RF generator, deposition time of catalysts, and a type of catalyst metals were modified to reveal the impact of these changes on the CNT's growth. The obtained nanostructures were studied by scanning electron microscopy (SEM) and transmission electron microscopy (TEM) as well as energy-dispersive X-ray (EDX) and Raman spectroscopies. The best results were obtained when the deposition conditions were as follows: argon-assisted plasma, generator power 120 W, catalyst sputtering duration 20 s, and nickel serving as a catalyst. A flexible propylene glycol vapor (PGV) and hydrogen peroxide vapor (HPV) sensors based on RF-sputtered CNTs combined with the Fe2O3:ZnO material were fabricated, and its DC and AC gas-sensing properties were studied. Impedance spectroscopy was used to evaluate an equivalent electrical circuit of the sensor. Temperature modulation led to the effective use of the same nanostructured film for PGV and HPV detection at 150 and 50 degrees C, respectively. At 50 degrees C temperature, the sensor response ranged from 3 to 27 values in the HPV concentrations of 0.5-25 ppm, respectively, demonstrating short response/recovery times, high response repeatability, and temporal stability.
Klasifikace
Druh
J<sub>imp</sub> - Článek v periodiku v databázi Web of Science
CEP obor
—
OECD FORD obor
10403 - Physical chemistry
Návaznosti výsledku
Projekt
—
Návaznosti
I - Institucionalni podpora na dlouhodoby koncepcni rozvoj vyzkumne organizace
Ostatní
Rok uplatnění
2025
Kód důvěrnosti údajů
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů
Údaje specifické pro druh výsledku
Název periodika
ACS Omega
ISSN
2470-1343
e-ISSN
2470-1343
Svazek periodika
10
Číslo periodika v rámci svazku
31
Stát vydavatele periodika
US - Spojené státy americké
Počet stran výsledku
14
Strana od-do
34733-34746
Kód UT WoS článku
001543619900001
EID výsledku v databázi Scopus
2-s2.0-105024970467