Investigation of the effect of mechanical pressure on the performance of negative lead accumulator electrodes during partial state of charge operation
Identifikátory výsledku
Kód výsledku v IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F61388955%3A_____%2F12%3A00376010" target="_blank" >RIV/61388955:_____/12:00376010 - isvavai.cz</a>
Výsledek na webu
<a href="http://dx.doi.org/10.1016/j.jpowsour.2012.01.151" target="_blank" >http://dx.doi.org/10.1016/j.jpowsour.2012.01.151</a>
DOI - Digital Object Identifier
<a href="http://dx.doi.org/10.1016/j.jpowsour.2012.01.151" target="_blank" >10.1016/j.jpowsour.2012.01.151</a>
Alternativní jazyky
Jazyk výsledku
angličtina
Název v původním jazyce
Investigation of the effect of mechanical pressure on the performance of negative lead accumulator electrodes during partial state of charge operation
Popis výsledku v původním jazyce
In the present work, our attention has been focused on the desired prevention of irreversible sulphation of negative test electrodes during cycling under simulated high-rate HEV duty. To this end, the negative active material was doped with carbon and, for comparison, with titanium dioxide as a nonconducting powdered additive, and the negative as well as positive electrodes were subjected to a defined pressure. Accelerated cycling revealed that electrodes doped with carbon in laboratory VRLA cells perform, in the first run, better than those doped with TiO2 since they reached about 30,000 cycles regardless of the applied pressure. However, the electrode performances were almost equalized in the second run. Mechanical pressure of 4 N cm2 has a pronounced favourable effect on the cycle life of negative electrodes with expanders. Higher pressures are not recommended. Electrodes doped with carbon but without standard expanders are capable of long-life cycling at elevated pressures around 6
Název v anglickém jazyce
Investigation of the effect of mechanical pressure on the performance of negative lead accumulator electrodes during partial state of charge operation
Popis výsledku anglicky
In the present work, our attention has been focused on the desired prevention of irreversible sulphation of negative test electrodes during cycling under simulated high-rate HEV duty. To this end, the negative active material was doped with carbon and, for comparison, with titanium dioxide as a nonconducting powdered additive, and the negative as well as positive electrodes were subjected to a defined pressure. Accelerated cycling revealed that electrodes doped with carbon in laboratory VRLA cells perform, in the first run, better than those doped with TiO2 since they reached about 30,000 cycles regardless of the applied pressure. However, the electrode performances were almost equalized in the second run. Mechanical pressure of 4 N cm2 has a pronounced favourable effect on the cycle life of negative electrodes with expanders. Higher pressures are not recommended. Electrodes doped with carbon but without standard expanders are capable of long-life cycling at elevated pressures around 6
Klasifikace
Druh
J<sub>x</sub> - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)
CEP obor
CG - Elektrochemie
OECD FORD obor
—
Návaznosti výsledku
Projekt
—
Návaznosti
Z - Vyzkumny zamer (s odkazem do CEZ)
Ostatní
Rok uplatnění
2012
Kód důvěrnosti údajů
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů
Údaje specifické pro druh výsledku
Název periodika
Journal of Power Sources
ISSN
0378-7753
e-ISSN
—
Svazek periodika
207
Číslo periodika v rámci svazku
JUN 1 2012
Stát vydavatele periodika
CH - Švýcarská konfederace
Počet stran výsledku
8
Strana od-do
37-44
Kód UT WoS článku
000302666800007
EID výsledku v databázi Scopus
—