EXPERIMENTAL AND NUMERICAL STUDY OF A CONTROLLED PULSATING FLOW

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F61388998%3A_____%2F08%3A00328693" target="_blank" >RIV/61388998:_____/08:00328693 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

EXPERIMENTAL AND NUMERICAL STUDY OF A CONTROLLED PULSATING FLOW

Popis výsledku v původním jazyce

A turbulent round air jet discharging into quiescent ambience was studied under circumferential excitation. Four synthetic jet actuators were distributed around the main nozzle exit; they were fed by an electronic control system with a chosen polarity and phase shift. This arrangement allowed to excite the main round jet in several modes, namely the (A) axisymmetric, (B) plane symmetric, (C) bifurcated, and (D) helical modes. The measurement of the excited jet flow fields A?D was performed using the PIVtechnique. Further, preliminary development of a numerical model of controlled pulsating jet flow is described. Relevant parameters in the numerical model and their effect on model accuracy were investigated. Emphasis is on the mesh density and time step size. This parametric study allowed us to clearly identify a regime of optimal mesh densities and time step sizes for the Reynolds number of interest. The simulations were calculated in Fluent.

Název v anglickém jazyce

EXPERIMENTAL AND NUMERICAL STUDY OF A CONTROLLED PULSATING FLOW

Popis výsledku anglicky

A turbulent round air jet discharging into quiescent ambience was studied under circumferential excitation. Four synthetic jet actuators were distributed around the main nozzle exit; they were fed by an electronic control system with a chosen polarity and phase shift. This arrangement allowed to excite the main round jet in several modes, namely the (A) axisymmetric, (B) plane symmetric, (C) bifurcated, and (D) helical modes. The measurement of the excited jet flow fields A?D was performed using the PIVtechnique. Further, preliminary development of a numerical model of controlled pulsating jet flow is described. Relevant parameters in the numerical model and their effect on model accuracy were investigated. Emphasis is on the mesh density and time step size. This parametric study allowed us to clearly identify a regime of optimal mesh densities and time step sizes for the Reynolds number of interest. The simulations were calculated in Fluent.

Druh

D - Stať ve sborníku

CEP obor

BK - Mechanika tekutin

OECD FORD obor

—

Projekt

<a href="/cs/project/IAA200760801" target="_blank" >IAA200760801: Pulzující proudy pro řízení proudových polí</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)<br>Z - Vyzkumny zamer (s odkazem do CEZ)

Rok uplatnění

2008

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

15th International Conference, STRUTEX

ISBN

978-80-7372-418-4

ISSN

—

e-ISSN

—

Počet stran výsledku

8

Strana od-do

—

Název nakladatele

TU Liberec

Místo vydání

Liberec

Místo konání akce

Liberec

Datum konání akce

1. 12. 2008

Typ akce podle státní příslušnosti

EUR - Evropská akce

Kód UT WoS článku

—