Comparison of properties and behaviour of selected systems of thin film - Substrate with TiSiN, AlCrN and AlTiN on samples and selected cutting tools

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F61388998%3A_____%2F18%3A00499178" target="_blank" >RIV/61388998:_____/18:00499178 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Comparison of properties and behaviour of selected systems of thin film - Substrate with TiSiN, AlCrN and AlTiN on samples and selected cutting tools

Popis výsledku v původním jazyce

The paper is devoted by evaluation of comparison of selected systems of thin film - basic material, which are optimized in the range of solution of the project with goal application of thin films on selected real cutting tools. There are evaluated thin films prepared by low voltage reactive arc evaporation in vacuum with different composition of ternary nitride. The evaluation of properties and behaviour is oriented on systems with thin films TiSiN, AlCrN and AlTiN. The surfaces of these systems of thin film - basic material are evaluated from point of view of verification homogeneity of thin films through of area of samples and through of geometry of selected real tools too. The distribution of thickness is evaluated by x-ray fluorescence analysis on samples and real selected places of geometry of tools too. The other comparison is realised from point of view of differences of mechanical properties and behaviour by using of indentation methods namely of nanoindentation and scratch indentation for evaluation of differences in hardness and adhesive cohesive behaviour of systems thin films - basic material.

Název v anglickém jazyce

Comparison of properties and behaviour of selected systems of thin film - Substrate with TiSiN, AlCrN and AlTiN on samples and selected cutting tools

Popis výsledku anglicky

The paper is devoted by evaluation of comparison of selected systems of thin film - basic material, which are optimized in the range of solution of the project with goal application of thin films on selected real cutting tools. There are evaluated thin films prepared by low voltage reactive arc evaporation in vacuum with different composition of ternary nitride. The evaluation of properties and behaviour is oriented on systems with thin films TiSiN, AlCrN and AlTiN. The surfaces of these systems of thin film - basic material are evaluated from point of view of verification homogeneity of thin films through of area of samples and through of geometry of selected real tools too. The distribution of thickness is evaluated by x-ray fluorescence analysis on samples and real selected places of geometry of tools too. The other comparison is realised from point of view of differences of mechanical properties and behaviour by using of indentation methods namely of nanoindentation and scratch indentation for evaluation of differences in hardness and adhesive cohesive behaviour of systems thin films - basic material.

Druh

D - Stať ve sborníku

CEP obor

—

OECD FORD obor

20506 - Coating and films

Projekt

Výsledek vznikl pri realizaci vícero projektů. Více informací v záložce Projekty.

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2018

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

Metal 2018 - 27th International conference on metallurgy and materials, Conference Proceedings

ISBN

978-80-87294-84-0

ISSN

—

e-ISSN

—

Počet stran výsledku

6

Strana od-do

947-952

Název nakladatele

TANGER Ltd

Místo vydání

Ostrava

Místo konání akce

Brno

Datum konání akce

23. 5. 2018

Typ akce podle státní příslušnosti

EUR - Evropská akce

Kód UT WoS článku

—