Sensitivity Analysis of the Material Parameters Obtained from the Measurements

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F61388998%3A_____%2F18%3A00535263" target="_blank" >RIV/61388998:_____/18:00535263 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Sensitivity Analysis of the Material Parameters Obtained from the Measurements

Popis výsledku v původním jazyce

The paper deals with sensitivity analysis of the material parameters of the ceramic material on the dispersion of the measured data from the sensors. Material parameters of ceramic material are calculated from a set of destruction tests of ceramic heads of total hip joint replacements. The standard way of calculation of the ceramic material parameters consists in carrying out a set of 3 (or 4) point bending tests of specimens which were cut out from parts of the ceramic material to be analysed. In case of ceramic heads of the prosthesis, it is not possible to cut out specimens of required dimensions because the heads are too small. On that score, a special testing jig was made, in which 40 heads were destructed. From the measured values of circumferential strains of the head’s external spherical surface under destruction (by the sensors – strain gauges), the state of stress in the head under destruction was established using the finite elements method. From the obtained values the material parameters of the ceramic material were calculated using Weibull’s weakest-link theory. The calculated material parameters (Weibull modulus m and normalized volume strength σo, the last material parameter – stress σu is assumed to be equal 0 and corresponds to the conservative approach) has the dispersion and the influence of this dispersion (in our case the dispersion ± 5 % is assumed) is analysed in detail.

Název v anglickém jazyce

Sensitivity Analysis of the Material Parameters Obtained from the Measurements

Popis výsledku anglicky

The paper deals with sensitivity analysis of the material parameters of the ceramic material on the dispersion of the measured data from the sensors. Material parameters of ceramic material are calculated from a set of destruction tests of ceramic heads of total hip joint replacements. The standard way of calculation of the ceramic material parameters consists in carrying out a set of 3 (or 4) point bending tests of specimens which were cut out from parts of the ceramic material to be analysed. In case of ceramic heads of the prosthesis, it is not possible to cut out specimens of required dimensions because the heads are too small. On that score, a special testing jig was made, in which 40 heads were destructed. From the measured values of circumferential strains of the head’s external spherical surface under destruction (by the sensors – strain gauges), the state of stress in the head under destruction was established using the finite elements method. From the obtained values the material parameters of the ceramic material were calculated using Weibull’s weakest-link theory. The calculated material parameters (Weibull modulus m and normalized volume strength σo, the last material parameter – stress σu is assumed to be equal 0 and corresponds to the conservative approach) has the dispersion and the influence of this dispersion (in our case the dispersion ± 5 % is assumed) is analysed in detail.

Druh

D - Stať ve sborníku

CEP obor

—

OECD FORD obor

20301 - Mechanical engineering

Projekt

—

Návaznosti

I - Institucionalni podpora na dlouhodoby koncepcni rozvoj vyzkumne organizace

Rok uplatnění

2018

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

PROCEEDINGS OF THE 2018 18TH INTERNATIONAL CONFERENCE ON MECHATRONICS - MECHATRONIKA (ME)

ISBN

978-80-214-5544-3

ISSN

—

e-ISSN

—

Počet stran výsledku

6

Strana od-do

505-510

Název nakladatele

Institute of Electrical and Electronics Engineers Inc.

Místo vydání

Brno

Místo konání akce

Brno

Datum konání akce

5. 12. 2018

Typ akce podle státní příslušnosti

EUR - Evropská akce

Kód UT WoS článku

000465104200080