Powder Metallurgy Preparation of Co-Based Alloys for Biomedical Applications

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F61389021%3A_____%2F15%3A00473164" target="_blank" >RIV/61389021:_____/15:00473164 - isvavai.cz</a>

Výsledek na webu

<a href="http://dx.doi.org/10.12693/APhysPolA.128.597" target="_blank" >http://dx.doi.org/10.12693/APhysPolA.128.597</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.12693/APhysPolA.128.597" target="_blank" >10.12693/APhysPolA.128.597</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Powder Metallurgy Preparation of Co-Based Alloys for Biomedical Applications

Popis výsledku v původním jazyce

Co-based alloys represent very important group of materials used for medical applications. Currently, fabrication of these materials is preferentially done by casting or forming. Production by powder metallurgy techniques is less common. However, powder metallurgy fabrication of these alloys brings advantages such as reduced machining, possibility of alloying by high-melting elements, preparation of nanocrystalline materials with enhanced mechanical properties or producing of porous alloys with improved ability to integrate into issues. In this work, our attention was focused on fundamental preparation of an CoCrMo alloy by two methods of powder metallurgy. In the first method, pure metallic powders were mixed, pressed and sintered in vacuum furnace. The second applied technology consisted of mechanical alloying using planetary ball mill and compaction by spark plasma sintering technique. A series of samples was prepared under various conditions by these procedures. Dependence of microstructure, phase composition and mechanical properties of prepared samples on fabrication conditions (milling parameters, sintering temperature etc.) was studied. Obtained results were compared with properties of commercial cast cobalt alloy used for medical applications.n

Název v anglickém jazyce

Powder Metallurgy Preparation of Co-Based Alloys for Biomedical Applications

Popis výsledku anglicky

Co-based alloys represent very important group of materials used for medical applications. Currently, fabrication of these materials is preferentially done by casting or forming. Production by powder metallurgy techniques is less common. However, powder metallurgy fabrication of these alloys brings advantages such as reduced machining, possibility of alloying by high-melting elements, preparation of nanocrystalline materials with enhanced mechanical properties or producing of porous alloys with improved ability to integrate into issues. In this work, our attention was focused on fundamental preparation of an CoCrMo alloy by two methods of powder metallurgy. In the first method, pure metallic powders were mixed, pressed and sintered in vacuum furnace. The second applied technology consisted of mechanical alloying using planetary ball mill and compaction by spark plasma sintering technique. A series of samples was prepared under various conditions by these procedures. Dependence of microstructure, phase composition and mechanical properties of prepared samples on fabrication conditions (milling parameters, sintering temperature etc.) was studied. Obtained results were compared with properties of commercial cast cobalt alloy used for medical applications.n

Druh

J_x - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)

CEP obor

JK - Koroze a povrchové úpravy materiálu

OECD FORD obor

—

Projekt

—

Návaznosti

I - Institucionalni podpora na dlouhodoby koncepcni rozvoj vyzkumne organizace

Rok uplatnění

2015

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Acta Physica Polonica. A

ISSN

0587-4246

e-ISSN

—

Svazek periodika

128

Číslo periodika v rámci svazku

4

Stát vydavatele periodika

PL - Polská republika

Počet stran výsledku

5

Strana od-do

597-601

Kód UT WoS článku

000366357300032

EID výsledku v databázi Scopus

2-s2.0-84950266091