Properties of Mechanically Alloyed W-Ti Materials with Dual Phase Particle Dispersion

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F61389021%3A_____%2F17%3A00474189" target="_blank" >RIV/61389021:_____/17:00474189 - isvavai.cz</a>

Nalezeny alternativní kódy

RIV/00216208:11320/17:10371448 RIV/00216208:11320/16:10336140 RIV/00216208:11320/17:10336140

Výsledek na webu

<a href="http://dx.doi.org/10.3390/met7010003" target="_blank" >http://dx.doi.org/10.3390/met7010003</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.3390/met7010003" target="_blank" >10.3390/met7010003</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Properties of Mechanically Alloyed W-Ti Materials with Dual Phase Particle Dispersion

Popis výsledku v původním jazyce

In the presented study, we report on the preparation and properties of mechanically alloyed W-Ti powders compacted by pulsed electric current sintering. Four different powder compositions of W-(3%–7%)Ti with Hf or HfC were prepared. The alloys structure contains only high-melting-point phases, namely the W-Ti matrix, complex carbide (Ti,W,Hf)C and HfO2 particle dispersion, Ti in the form of a separate phase is not present. The bending strength of the alloys depends on the amount of Ti added. The addition of 3 wt. % Ti led to an increase whereas 7 wt. % Ti led to a major decrease in strength when compared to unalloyed tungsten sintered at similar conditions. The addition of Ti significantly lowered the room-temperature thermal conductivity of all prepared materials. However, unlike pure tungsten, the conductivity of the prepared alloys increased with the temperature. Thus, the thermal conductivity of the alloys at 1300 °C approached the value of the unalloyed tungsten.

Název v anglickém jazyce

Properties of Mechanically Alloyed W-Ti Materials with Dual Phase Particle Dispersion

Popis výsledku anglicky

In the presented study, we report on the preparation and properties of mechanically alloyed W-Ti powders compacted by pulsed electric current sintering. Four different powder compositions of W-(3%–7%)Ti with Hf or HfC were prepared. The alloys structure contains only high-melting-point phases, namely the W-Ti matrix, complex carbide (Ti,W,Hf)C and HfO2 particle dispersion, Ti in the form of a separate phase is not present. The bending strength of the alloys depends on the amount of Ti added. The addition of 3 wt. % Ti led to an increase whereas 7 wt. % Ti led to a major decrease in strength when compared to unalloyed tungsten sintered at similar conditions. The addition of Ti significantly lowered the room-temperature thermal conductivity of all prepared materials. However, unlike pure tungsten, the conductivity of the prepared alloys increased with the temperature. Thus, the thermal conductivity of the alloys at 1300 °C approached the value of the unalloyed tungsten.

Druh

J_imp - Článek v periodiku v databázi Web of Science

CEP obor

—

OECD FORD obor

20501 - Materials engineering

Projekt

<a href="/cs/project/GA15-15609S" target="_blank" >GA15-15609S: Ultra-jemnozrnné a nanokrystalické kovové materiály s vysokou pevností připravené slinovaním pulzním elektrickým proudem</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2017

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Metals

ISSN

2075-4701

e-ISSN

—

Svazek periodika

7

Číslo periodika v rámci svazku

1

Stát vydavatele periodika

CH - Švýcarská konfederace

Počet stran výsledku

10

Strana od-do

—

Kód UT WoS článku

000396509900003

EID výsledku v databázi Scopus

2-s2.0-85009743259