An Industrial Application of a Method for Spatial Motion Measurement

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F61989100%3A27230%2F10%3A86076143" target="_blank" >RIV/61989100:27230/10:86076143 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

An Industrial Application of a Method for Spatial Motion Measurement

Popis výsledku v původním jazyce

This paper deals with 3D motion measurement of a washing unit realized on an industrial washer-extractor, which was realized on the basis of a demand from industry. The inductive standard displacement transducers were used in the measurement. With respect to the number of degrees of freedom in 3D six axial displacement transducers were used. A new displacement transducers arrangement was suggested to minimize measuring error. The basic principles of measurement are briefly described too. Acquired results were compared with results from simple displacement measurement conducted at choice points of the industrial washer-extractor. A validation measurement by the 7th displacement transducer was also realized and very good correspondence was found. The proposed measurement method makes possible relatively easy and cheap real-time capture of the current position of vibrated constructional parts.

Název v anglickém jazyce

An Industrial Application of a Method for Spatial Motion Measurement

Popis výsledku anglicky

This paper deals with 3D motion measurement of a washing unit realized on an industrial washer-extractor, which was realized on the basis of a demand from industry. The inductive standard displacement transducers were used in the measurement. With respect to the number of degrees of freedom in 3D six axial displacement transducers were used. A new displacement transducers arrangement was suggested to minimize measuring error. The basic principles of measurement are briefly described too. Acquired results were compared with results from simple displacement measurement conducted at choice points of the industrial washer-extractor. A validation measurement by the 7th displacement transducer was also realized and very good correspondence was found. The proposed measurement method makes possible relatively easy and cheap real-time capture of the current position of vibrated constructional parts.

Druh

D - Stať ve sborníku

CEP obor

JB - Senzory, čidla, měření a regulace

OECD FORD obor

—

Projekt

—

Návaznosti

Z - Vyzkumny zamer (s odkazem do CEZ)

Rok uplatnění

2010

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

Experimentální analýza napětí 2010

ISBN

978-80-244-2533-7

ISSN

—

e-ISSN

—

Počet stran výsledku

6

Strana od-do

—

Název nakladatele

Univerzita Palackého

Místo vydání

Olomouc

Místo konání akce

Velké Losiny, CZECH REPUBLIC

Datum konání akce

31. 5. 2010

Typ akce podle státní příslušnosti

CST - Celostátní akce

Kód UT WoS článku

—