Influence of basic process parameters on mechanical and internal properties of 316l steel in slm process for renishaw AM400

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F61989100%3A27230%2F19%3A10242035" target="_blank" >RIV/61989100:27230/19:10242035 - isvavai.cz</a>

Výsledek na webu

<a href="http://www.mmscience.eu/journal/issues/march-2019-a59ea10d-85fe-45b1-858e-28e401dff8d2/articles/influence-of-basic-process-parameters-on-mechanical-and-internal-properties-of-316l-steel-in-slm-process-for-renishaw-am400" target="_blank" >http://www.mmscience.eu/journal/issues/march-2019-a59ea10d-85fe-45b1-858e-28e401dff8d2/articles/influence-of-basic-process-parameters-on-mechanical-and-internal-properties-of-316l-steel-in-slm-process-for-renishaw-am400</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.17973/MMSJ.2019_03_2018127" target="_blank" >10.17973/MMSJ.2019_03_2018127</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Influence of basic process parameters on mechanical and internal properties of 316l steel in slm process for renishaw AM400

Popis výsledku v původním jazyce

The paper deals with the study and experimental evaluation of the influence of process parameters determining the resulting mechanical properties of the components after additive production using the 1.4404 (316L) stainless steel SLM method. The determining process parameters that have been investigated are laser power, scanning speed and layer creation strategy. These parameters fundamentally affect the microstructure and macrostructure of components created by the SLM method, therefore, they have been subjected to closer examination. The results then determined the ideal set of parameters according to the assessment criteria - tensile test, porosity and roughness of the surface. Experiments were performed on the Renishaw AM400 and therefore the results and recommendations are directly related to this particular machine.

Název v anglickém jazyce

Influence of basic process parameters on mechanical and internal properties of 316l steel in slm process for renishaw AM400

Popis výsledku anglicky

The paper deals with the study and experimental evaluation of the influence of process parameters determining the resulting mechanical properties of the components after additive production using the 1.4404 (316L) stainless steel SLM method. The determining process parameters that have been investigated are laser power, scanning speed and layer creation strategy. These parameters fundamentally affect the microstructure and macrostructure of components created by the SLM method, therefore, they have been subjected to closer examination. The results then determined the ideal set of parameters according to the assessment criteria - tensile test, porosity and roughness of the surface. Experiments were performed on the Renishaw AM400 and therefore the results and recommendations are directly related to this particular machine.

Druh

J_SC - Článek v periodiku v databázi SCOPUS

CEP obor

—

OECD FORD obor

20301 - Mechanical engineering

Projekt

—

Návaznosti

S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2019

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

MM Science Journal

ISSN

1803-1269

e-ISSN

—

Svazek periodika

Neuveden

Číslo periodika v rámci svazku

March 2019

Stát vydavatele periodika

CZ - Česká republika

Počet stran výsledku

5

Strana od-do

2790-2794

Kód UT WoS článku

—

EID výsledku v databázi Scopus

2-s2.0-85065012420