Experiments of Thermal Fields of Sensors Supported by Digital Image Processing

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F61989100%3A27240%2F08%3A00018795" target="_blank" >RIV/61989100:27240/08:00018795 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Experiments of Thermal Fields of Sensors Supported by Digital Image Processing

Popis výsledku v původním jazyce

In this paper, the experiments of the thermal fields load of microelectronic sensor are discussed. The modeled sensor is developed for the oil level gauge and the oil temperature measuring in the motor car oil pan case. The body of the sensor is spuriously heated by oil and by electronic self-heating. Sensor mathematical models are identical to the physical model which is measured. Mathematical model load is constructed by the ANSYS graphical generator. At the physical model, the sensorpsilas surface temperature is measured by an infrared camera in time to stabilize the state of the system load. There is described the methodology of data pre-processing by the mathematical program MATLAB from IR camera measuring. Also there is a digital image processingdescription used for the mathematical model and the physical model parameters used for comparing and accuracy. Differences between analytical and experimental results are analyzed by the correlation mathematical method.

Název v anglickém jazyce

Experiments of Thermal Fields of Sensors Supported by Digital Image Processing

Popis výsledku anglicky

In this paper, the experiments of the thermal fields load of microelectronic sensor are discussed. The modeled sensor is developed for the oil level gauge and the oil temperature measuring in the motor car oil pan case. The body of the sensor is spuriously heated by oil and by electronic self-heating. Sensor mathematical models are identical to the physical model which is measured. Mathematical model load is constructed by the ANSYS graphical generator. At the physical model, the sensorpsilas surface temperature is measured by an infrared camera in time to stabilize the state of the system load. There is described the methodology of data pre-processing by the mathematical program MATLAB from IR camera measuring. Also there is a digital image processingdescription used for the mathematical model and the physical model parameters used for comparing and accuracy. Differences between analytical and experimental results are analyzed by the correlation mathematical method.

Druh

D - Stať ve sborníku

CEP obor

BJ - Termodynamika

OECD FORD obor

—

Projekt

<a href="/cs/project/GA102%2F06%2F0498" target="_blank" >GA102/06/0498: Modelování teplotní zátěže elektroniky moderních snímačů</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2008

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

16th Mediterranean Conference on Control and Automation

ISBN

978-1-4244-2504-4

ISSN

—

e-ISSN

—

Počet stran výsledku

6

Strana od-do

960-965

Název nakladatele

IEEE

Místo vydání

345 E 47TH ST, NEW YORK, NY 10017 USA

Místo konání akce

Ajaccio-Corsica

Datum konání akce

25. 6. 2008

Typ akce podle státní příslušnosti

WRD - Celosvětová akce

Kód UT WoS článku

000261534400160