Study of diffusivity in ternary systems-diffusion joints of Ni/Ni3Al-Fe and Ni/Ni3Al-Ti
Identifikátory výsledku
Kód výsledku v IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F61989100%3A27360%2F08%3A00019391" target="_blank" >RIV/61989100:27360/08:00019391 - isvavai.cz</a>
Výsledek na webu
—
DOI - Digital Object Identifier
—
Alternativní jazyky
Jazyk výsledku
angličtina
Název v původním jazyce
Study of diffusivity in ternary systems-diffusion joints of Ni/Ni3Al-Fe and Ni/Ni3Al-Ti
Popis výsledku v původním jazyce
Diffusion phenomena in multi-component metallic systems have been studied at diffusion joints Ni/Ni3Al-Fe and Ni/Ni3Al-Ti. Chemical composition of the found intermetallic compound corresponded to the phase gama´ of the ternary system Ni-Al-Me. At first,specimens in the form of cylinders (diameter 10 mm) were joined by two technologies: electron beam welding and resistance butt welding. The specimens were placed in evacuated quartz ampoules and annealed at the temperature 1050 °C for the time 100 hoursand then quenched into water. They were examined metallographically in the states before and after the annealing, their micro-hardness in the diffusion joint area was measured and the global (ICP-AES, SPECTRO MAX) chemical analysis was carried out and concentration profiles of individual components were explored by the X-ray (WDX, EDX) micro-analysis. The obtained concentration profiles were evaluated applying the modified Matano-Boltzmann method utilizing the concentration curves for wh
Název v anglickém jazyce
Study of diffusivity in ternary systems-diffusion joints of Ni/Ni3Al-Fe and Ni/Ni3Al-Ti
Popis výsledku anglicky
Diffusion phenomena in multi-component metallic systems have been studied at diffusion joints Ni/Ni3Al-Fe and Ni/Ni3Al-Ti. Chemical composition of the found intermetallic compound corresponded to the phase gama´ of the ternary system Ni-Al-Me. At first,specimens in the form of cylinders (diameter 10 mm) were joined by two technologies: electron beam welding and resistance butt welding. The specimens were placed in evacuated quartz ampoules and annealed at the temperature 1050 °C for the time 100 hoursand then quenched into water. They were examined metallographically in the states before and after the annealing, their micro-hardness in the diffusion joint area was measured and the global (ICP-AES, SPECTRO MAX) chemical analysis was carried out and concentration profiles of individual components were explored by the X-ray (WDX, EDX) micro-analysis. The obtained concentration profiles were evaluated applying the modified Matano-Boltzmann method utilizing the concentration curves for wh
Klasifikace
Druh
D - Stať ve sborníku
CEP obor
JG - Hutnictví, kovové materiály
OECD FORD obor
—
Návaznosti výsledku
Projekt
<a href="/cs/project/GA106%2F06%2F1190" target="_blank" >GA106/06/1190: Studium procesů krystalizace vícekomponentních slitin s cílem stanovení zákonitostí interakce prvků a tvorby struktury</a><br>
Návaznosti
Z - Vyzkumny zamer (s odkazem do CEZ)
Ostatní
Rok uplatnění
2008
Kód důvěrnosti údajů
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů
Údaje specifické pro druh výsledku
Název statě ve sborníku
Proceeding of the 18th Joint Seminar "Development of Materials Science in Research and Education"
ISBN
978-80-254-0864-3
ISSN
—
e-ISSN
—
Počet stran výsledku
2
Strana od-do
—
Název nakladatele
Czech and Slovak Crystallographic Association
Místo vydání
Praha
Místo konání akce
Hnanice
Datum konání akce
2. 9. 2008
Typ akce podle státní příslušnosti
EUR - Evropská akce
Kód UT WoS článku
—