Metallographic Evaluation of TRIP Steel Hot Rolled on TANDEM Laboratory Mill

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F61989100%3A27360%2F09%3A00022052" target="_blank" >RIV/61989100:27360/09:00022052 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Metallographic Evaluation of TRIP Steel Hot Rolled on TANDEM Laboratory Mill

Popis výsledku v původním jazyce

Performed laboratory experiments of TRIP steel hot rolling on the laboratory TANDEM mill had the aim to simulate hot rolling on two stands of the Steckel mill. Laboratory hot rolled experiment was divided into three parts based on different finish rolling deformation conditions. Further to this also different finish rolling temperatures and finish cooling temperatures were set in order to evaluate their influence on material. Laboratory hot rolled TRIP steel strips were subsequently tested in order to determine their mechanical properties and microstructure of the samples was in detail analysed by metallography. Mechanical testing performed on the samples confirmed mechanical properties at the levels, which are characteristic for TRIP steel. Microstructure of TRIP steels are characteristic by multiphase microstructure typically consisting of ferrite, bainite and retained austenite. Within metallographic evaluation several etching methods were applied. Influence on appearance and analys

Název v anglickém jazyce

Metallographic Evaluation of TRIP Steel Hot Rolled on TANDEM Laboratory Mill

Popis výsledku anglicky

Performed laboratory experiments of TRIP steel hot rolling on the laboratory TANDEM mill had the aim to simulate hot rolling on two stands of the Steckel mill. Laboratory hot rolled experiment was divided into three parts based on different finish rolling deformation conditions. Further to this also different finish rolling temperatures and finish cooling temperatures were set in order to evaluate their influence on material. Laboratory hot rolled TRIP steel strips were subsequently tested in order to determine their mechanical properties and microstructure of the samples was in detail analysed by metallography. Mechanical testing performed on the samples confirmed mechanical properties at the levels, which are characteristic for TRIP steel. Microstructure of TRIP steels are characteristic by multiphase microstructure typically consisting of ferrite, bainite and retained austenite. Within metallographic evaluation several etching methods were applied. Influence on appearance and analys

Druh

J_x - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)

CEP obor

JG - Hutnictví, kovové materiály

OECD FORD obor

—

Projekt

<a href="/cs/project/FT-TA2%2F091" target="_blank" >FT-TA2/091: *Technologie výroby pásů z moderních typů ocelí.</a><br>

Návaznosti

Z - Vyzkumny zamer (s odkazem do CEZ)

Rok uplatnění

2009

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Hutnické listy

ISSN

0018-8069

e-ISSN

—

Svazek periodika

62

Číslo periodika v rámci svazku

4

Stát vydavatele periodika

CZ - Česká republika

Počet stran výsledku

4

Strana od-do

—

Kód UT WoS článku

—

EID výsledku v databázi Scopus

—