Correction, calculation and experimental adjustment of burner, destined for burning methane in electric field

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F61989100%3A27360%2F11%3A86081056" target="_blank" >RIV/61989100:27360/11:86081056 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Correction, calculation and experimental adjustment of burner, destined for burning methane in electric field

Popis výsledku v původním jazyce

In this paper was solved modification of combustion burner for experimental exam of methane combustion in the electric field with high intensity voltage. The burner was originally designed for the combustion stack gas. The burner must have been necessaryadjusted, because the mixture of stack gas and air was replaced by mixture of methane and oxygen. The fundamental requirement is to adjust the height of the flame that may reach a maximum of height 100 mm. This height was required because the application of electric field intensity with the maximum voltage of 100 kV. Another objective was to achieve a geometrically stable methane-oxygen flame. Gas mixture of methane and oxygen were chosen because the simplicity of combustion reactions. This paper includes a detailed description of stack gas burner, the recalculation of the parameters for a mixture of methane and oxygen with the calculation of flow rate regulation for individual gasses, calculation of flow velocity and differential pres

Název v anglickém jazyce

Correction, calculation and experimental adjustment of burner, destined for burning methane in electric field

Popis výsledku anglicky

In this paper was solved modification of combustion burner for experimental exam of methane combustion in the electric field with high intensity voltage. The burner was originally designed for the combustion stack gas. The burner must have been necessaryadjusted, because the mixture of stack gas and air was replaced by mixture of methane and oxygen. The fundamental requirement is to adjust the height of the flame that may reach a maximum of height 100 mm. This height was required because the application of electric field intensity with the maximum voltage of 100 kV. Another objective was to achieve a geometrically stable methane-oxygen flame. Gas mixture of methane and oxygen were chosen because the simplicity of combustion reactions. This paper includes a detailed description of stack gas burner, the recalculation of the parameters for a mixture of methane and oxygen with the calculation of flow rate regulation for individual gasses, calculation of flow velocity and differential pres

Druh

J_x - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)

CEP obor

JR - Ostatní strojírenství

OECD FORD obor

—

Projekt

—

Návaznosti

S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2011

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Sborník vědeckých prací Vysoké školy báňské - Technické univerzity Ostrava. Řada strojní

ISSN

1210-0471

e-ISSN

—

Svazek periodika

57

Číslo periodika v rámci svazku

1

Stát vydavatele periodika

CZ - Česká republika

Počet stran výsledku

9

Strana od-do

115-123

Kód UT WoS článku

—

EID výsledku v databázi Scopus

—