Influence of remelting repeated on the mechanical properties and structure of alloys RR.350

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F61989100%3A27360%2F12%3A86082162" target="_blank" >RIV/61989100:27360/12:86082162 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Influence of remelting repeated on the mechanical properties and structure of alloys RR.350

Popis výsledku v původním jazyce

Influence of repeated using of alloys on base Al ? Cu is the goal of this study. Alloy RR350 was used for this study. Specimens for tension examination were casted to the metal forms, which were protected by preservative coating. Pouring temperature andtemperature of iron mold were controlled in order to keep constant conditions of experiments for all testing samples. From poured samples the testing rods were prepared to determination of tensile strength under laboratory (20 °C) and under higher temperature (with maximum about 350 °C). Specimens were also taken for determination of hardness (HBS) and metallographic analysis from poured samples. Metaloographic analysis was evaluated by using microscope GX 51, which equips polarization light with magnification from 12.5 to 1000. Thermo-mechanical properties were carried out at the author´s working place ? Department of Foundry Engineering, Faculty of Metallurgy and Material Engineriing, Technical University of Ostrava. Description of th

Název v anglickém jazyce

Influence of remelting repeated on the mechanical properties and structure of alloys RR.350

Popis výsledku anglicky

Influence of repeated using of alloys on base Al ? Cu is the goal of this study. Alloy RR350 was used for this study. Specimens for tension examination were casted to the metal forms, which were protected by preservative coating. Pouring temperature andtemperature of iron mold were controlled in order to keep constant conditions of experiments for all testing samples. From poured samples the testing rods were prepared to determination of tensile strength under laboratory (20 °C) and under higher temperature (with maximum about 350 °C). Specimens were also taken for determination of hardness (HBS) and metallographic analysis from poured samples. Metaloographic analysis was evaluated by using microscope GX 51, which equips polarization light with magnification from 12.5 to 1000. Thermo-mechanical properties were carried out at the author´s working place ? Department of Foundry Engineering, Faculty of Metallurgy and Material Engineriing, Technical University of Ostrava. Description of th

Druh

D - Stať ve sborníku

CEP obor

JG - Hutnictví, kovové materiály

OECD FORD obor

—

Projekt

—

Návaznosti

S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2012

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

METAL 2012 : 21st International Conference on Metallurgy and Materials : conference proceedings

ISBN

978-80-87294-29-1

ISSN

—

e-ISSN

—

Počet stran výsledku

5

Strana od-do

1-5

Název nakladatele

Tanger

Místo vydání

Ostrava

Místo konání akce

Brno

Datum konání akce

23. 5. 2012

Typ akce podle státní příslušnosti

WRD - Celosvětová akce

Kód UT WoS článku

—