Temperature effect on the microstructural development of Al-Ni layered binary couples produced by an unconventional method.

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F61989100%3A27360%2F14%3A86092622" target="_blank" >RIV/61989100:27360/14:86092622 - isvavai.cz</a>

Nalezeny alternativní kódy

RIV/00216305:26620/14:PU110918

Výsledek na webu

<a href="http://dx.doi.org/10.1016/j.surfcoat.2014.09.059" target="_blank" >http://dx.doi.org/10.1016/j.surfcoat.2014.09.059</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.1016/j.surfcoat.2014.09.059" target="_blank" >10.1016/j.surfcoat.2014.09.059</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Temperature effect on the microstructural development of Al-Ni layered binary couples produced by an unconventional method.

Popis výsledku v původním jazyce

In this work, the authors have used an unconventional experimental route that consists of (i) deposition of a nickel coating onto an aluminium substrate and (ii) the subsequent heat treatment of created couple in order to produce intermetallic-layered structures, hypereutectic or bulk aluminide intermetallic alloys. The procedure was conducted by controlling chemical concentrations in the Al-rich corner of Al-Ni binary system. The couple was prepared by high velocity oxyfuel spraying of 99.0 wt.% Ni powder onto the surface of 99.999 wt.% Al sheet. The specimens for heat treatment were manufactured immediately after the spraying. The heat treatment was carried out in a differential thermal analysis apparatus by using the temperature range of 600-1200 degrees C, thus considering the solid state, transient liquid as well as liquid phase of aluminium, with a constant heating/cooling rate of 5 degrees C/min in an argon atmosphere. Microstructural development of produced alloys was studied b

Název v anglickém jazyce

Temperature effect on the microstructural development of Al-Ni layered binary couples produced by an unconventional method.

Popis výsledku anglicky

In this work, the authors have used an unconventional experimental route that consists of (i) deposition of a nickel coating onto an aluminium substrate and (ii) the subsequent heat treatment of created couple in order to produce intermetallic-layered structures, hypereutectic or bulk aluminide intermetallic alloys. The procedure was conducted by controlling chemical concentrations in the Al-rich corner of Al-Ni binary system. The couple was prepared by high velocity oxyfuel spraying of 99.0 wt.% Ni powder onto the surface of 99.999 wt.% Al sheet. The specimens for heat treatment were manufactured immediately after the spraying. The heat treatment was carried out in a differential thermal analysis apparatus by using the temperature range of 600-1200 degrees C, thus considering the solid state, transient liquid as well as liquid phase of aluminium, with a constant heating/cooling rate of 5 degrees C/min in an argon atmosphere. Microstructural development of produced alloys was studied b

Druh

J_x - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)

CEP obor

JG - Hutnictví, kovové materiály

OECD FORD obor

—

Projekt

Výsledek vznikl pri realizaci vícero projektů. Více informací v záložce Projekty.

Návaznosti

V - Vyzkumna aktivita podporovana z jinych verejnych zdroju

Rok uplatnění

2014

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Surface & Coatings Technology

ISSN

0257-8972

e-ISSN

—

Svazek periodika

258

Číslo periodika v rámci svazku

november

Stát vydavatele periodika

CH - Švýcarská konfederace

Počet stran výsledku

7

Strana od-do

95-101

Kód UT WoS článku

000346895000009

EID výsledku v databázi Scopus

—