Deformation Behavior of La2O3-Doped Copper during Equal Channel Angular Pressing

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F61989100%3A27360%2F24%3A10256142" target="_blank" >RIV/61989100:27360/24:10256142 - isvavai.cz</a>

Výsledek na webu

<a href="https://www.webofscience.com/wos/woscc/full-record/WOS:001381735300001" target="_blank" >https://www.webofscience.com/wos/woscc/full-record/WOS:001381735300001</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.1002/adem.202402412" target="_blank" >10.1002/adem.202402412</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Deformation Behavior of La2O3-Doped Copper during Equal Channel Angular Pressing

Popis výsledku v původním jazyce

Pure copper has a very low strength of not more than 20 MPa. Nevertheless, its mechanical properties can be enhanced by (micro)alloying, additions of strengthening particles/elements, or imparting structure modifications/grain refinement via (severe) shear strain. The presented study proposes a way of strengthening commercially pure copper by combining 5 wt% addition of La2O3 particles and deformation processing. The composite is vacuum induction cast and subsequently processed by the equal channel angular pressing (ECAP) severe plastic deformation method. Single-pass ECAP through a die with 110 degrees angle is selected to observe the effect of La2O3 addition on the development of substructure at the beginning of plastic deformation. The results show that the addition of oxide particles not only enhances the microhardness, but also efficiently supports the development of subgrains and shear bands during deformation, which finally results in an increase in the microhardness of the composite to more than double the original copper value. Although the presence of La2O3 particles slightly decreases the electric conductivity, the subsequent ECAP processing provides the final composite with a conductivity of 97.9% IACS (International Annealed Copper Standard), as it promotes the alignment of the strengthening particles along the developed shear bands.

Název v anglickém jazyce

Deformation Behavior of La2O3-Doped Copper during Equal Channel Angular Pressing

Popis výsledku anglicky

Pure copper has a very low strength of not more than 20 MPa. Nevertheless, its mechanical properties can be enhanced by (micro)alloying, additions of strengthening particles/elements, or imparting structure modifications/grain refinement via (severe) shear strain. The presented study proposes a way of strengthening commercially pure copper by combining 5 wt% addition of La2O3 particles and deformation processing. The composite is vacuum induction cast and subsequently processed by the equal channel angular pressing (ECAP) severe plastic deformation method. Single-pass ECAP through a die with 110 degrees angle is selected to observe the effect of La2O3 addition on the development of substructure at the beginning of plastic deformation. The results show that the addition of oxide particles not only enhances the microhardness, but also efficiently supports the development of subgrains and shear bands during deformation, which finally results in an increase in the microhardness of the composite to more than double the original copper value. Although the presence of La2O3 particles slightly decreases the electric conductivity, the subsequent ECAP processing provides the final composite with a conductivity of 97.9% IACS (International Annealed Copper Standard), as it promotes the alignment of the strengthening particles along the developed shear bands.

Druh

J_imp - Článek v periodiku v databázi Web of Science

CEP obor

—

OECD FORD obor

20505 - Composites (including laminates, reinforced plastics, cermets, combined natural and synthetic fibre fabrics; filled composites)

Projekt

<a href="/cs/project/GA22-11949S" target="_blank" >GA22-11949S: Nanodvojčata, funkční vlastnosti řízené intenzivní plastickou deformací</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2024

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Advanced Engineering Materials

ISSN

1438-1656

e-ISSN

1527-2648

Svazek periodika

Neuvedeno

Číslo periodika v rámci svazku

2024

Stát vydavatele periodika

DE - Spolková republika Německo

Počet stran výsledku

7

Strana od-do

nestránkováno

Kód UT WoS článku

001381735300001

EID výsledku v databázi Scopus

2-s2.0-85212786281