Anisotropic magnetic properties of milled bearing steel surface

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F61989100%3A27640%2F15%3A86095517" target="_blank" >RIV/61989100:27640/15:86095517 - isvavai.cz</a>

Výsledek na webu

<a href="http://dx.doi.org/10.12693/APhysPolA.127.1421" target="_blank" >http://dx.doi.org/10.12693/APhysPolA.127.1421</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.12693/APhysPolA.127.1421" target="_blank" >10.12693/APhysPolA.127.1421</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Anisotropic magnetic properties of milled bearing steel surface

Popis výsledku v původním jazyce

For many reasons, the steel surfaces are machined to obtain required physical properties. Suitable methods are required for the management and control of the manufacturing processes, which are simultaneously sufficiently robust and sensitive. The non-destructive testing methods, sensitive to the magnetic properties of the surface, are very suitable for this purpose. The Barkhausen noise (BN) measurement, which reveals the discontinuous movement of the magnetic domains in the thin surface layer during magnetisation reversal process is very robust, while magneto-optical Kerr effect (MOKE) method, using polarized light for orientation measurements of magnetic domains at the surface, is very sensitive and provides detailed information about hysteresis curves (HC) of the materials. In this contribution our results obtained on the milled 100Cr6 bearing steel are presented. These properties were obtained by MOKE laboratory measurements and bring very interesting facts about the magnetisation

Název v anglickém jazyce

Anisotropic magnetic properties of milled bearing steel surface

Popis výsledku anglicky

For many reasons, the steel surfaces are machined to obtain required physical properties. Suitable methods are required for the management and control of the manufacturing processes, which are simultaneously sufficiently robust and sensitive. The non-destructive testing methods, sensitive to the magnetic properties of the surface, are very suitable for this purpose. The Barkhausen noise (BN) measurement, which reveals the discontinuous movement of the magnetic domains in the thin surface layer during magnetisation reversal process is very robust, while magneto-optical Kerr effect (MOKE) method, using polarized light for orientation measurements of magnetic domains at the surface, is very sensitive and provides detailed information about hysteresis curves (HC) of the materials. In this contribution our results obtained on the milled 100Cr6 bearing steel are presented. These properties were obtained by MOKE laboratory measurements and bring very interesting facts about the magnetisation

Druh

J_x - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)

CEP obor

BM - Fyzika pevných látek a magnetismus

OECD FORD obor

—

Projekt

Výsledek vznikl pri realizaci vícero projektů. Více informací v záložce Projekty.

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2015

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Acta Physica Polonica A

ISSN

0587-4246

e-ISSN

—

Svazek periodika

127

Číslo periodika v rámci svazku

4

Stát vydavatele periodika

PL - Polská republika

Počet stran výsledku

3

Strana od-do

1421-1423

Kód UT WoS článku

000357937100154

EID výsledku v databázi Scopus

2-s2.0-84938901337