Biodegradable eco-friendly drilling fluid: a study on the use of peanut shell with different particle sizes as sustainable additives

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F61989592%3A15310%2F25%3A73633729" target="_blank" >RIV/61989592:15310/25:73633729 - isvavai.cz</a>

Výsledek na webu

<a href="https://link.springer.com/article/10.1007/s11696-025-04052-1" target="_blank" >https://link.springer.com/article/10.1007/s11696-025-04052-1</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.1007/s11696-025-04052-1" target="_blank" >10.1007/s11696-025-04052-1</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Biodegradable eco-friendly drilling fluid: a study on the use of peanut shell with different particle sizes as sustainable additives

Popis výsledku v původním jazyce

Meeting the global energy demand and sustainable development of conventional petroleum reserves necessitates the development of high-performance and environmentally friendly water-based drilling fluids (WBDF). Nevertheless, one of the major concerns of using WBDF is the fluid loss due to its penetration into the formation during the drilling operation. Various additives (fluid-loss agents) in the industry have been introduced to tackle the issue but at the cost of non-biodegradable hazardous chemicals. Due to the recent interest in environmentally friendly WBDF additives, this study looked at the suitability of the composite part of peanut shell powder (CSP). The CSP was selected because of affordability, accessibility and fibrous content. Following the American Petroleum Institute (API) guidelines for preparing the drilling mud additives, six different laboratory experiments were carried out for biodegradable drilling fluids prepared from CSP at different concentrations of 1, 2 and 3 wt% and particle sizes (fine, 224 μm and medium, 1.12 mm). Major elemental and temperature analyses of the samples were conducted using Energy-dispersive X-ray Spectroscopy (EDX), Fourier Transform Infrared spectroscopy (FTIR) and a Thermogravimetric Analyser (TGA). Comparing the results with the referenced WBDF indicates that adding 1, 2 and 3 wt % fine CSP decreases the fluid loss by 37%, 50% and 65%, respectively. In addition, using medium-size CSP in the same concentration of 1, 2 and 3 wt % reduced the fluid loss by 30%, 39% and 53%, respectively. Based on the results, the use of fine particle size CSP with a 3 wt % weight concentration is recommended, as it creates a thin mud cake with lower permeability, allowing for better control of fluid loss.

Název v anglickém jazyce

Biodegradable eco-friendly drilling fluid: a study on the use of peanut shell with different particle sizes as sustainable additives

Popis výsledku anglicky

Meeting the global energy demand and sustainable development of conventional petroleum reserves necessitates the development of high-performance and environmentally friendly water-based drilling fluids (WBDF). Nevertheless, one of the major concerns of using WBDF is the fluid loss due to its penetration into the formation during the drilling operation. Various additives (fluid-loss agents) in the industry have been introduced to tackle the issue but at the cost of non-biodegradable hazardous chemicals. Due to the recent interest in environmentally friendly WBDF additives, this study looked at the suitability of the composite part of peanut shell powder (CSP). The CSP was selected because of affordability, accessibility and fibrous content. Following the American Petroleum Institute (API) guidelines for preparing the drilling mud additives, six different laboratory experiments were carried out for biodegradable drilling fluids prepared from CSP at different concentrations of 1, 2 and 3 wt% and particle sizes (fine, 224 μm and medium, 1.12 mm). Major elemental and temperature analyses of the samples were conducted using Energy-dispersive X-ray Spectroscopy (EDX), Fourier Transform Infrared spectroscopy (FTIR) and a Thermogravimetric Analyser (TGA). Comparing the results with the referenced WBDF indicates that adding 1, 2 and 3 wt % fine CSP decreases the fluid loss by 37%, 50% and 65%, respectively. In addition, using medium-size CSP in the same concentration of 1, 2 and 3 wt % reduced the fluid loss by 30%, 39% and 53%, respectively. Based on the results, the use of fine particle size CSP with a 3 wt % weight concentration is recommended, as it creates a thin mud cake with lower permeability, allowing for better control of fluid loss.

Druh

J_imp - Článek v periodiku v databázi Web of Science

CEP obor

—

OECD FORD obor

20401 - Chemical engineering (plants, products)

Projekt

—

Návaznosti

I - Institucionalni podpora na dlouhodoby koncepcni rozvoj vyzkumne organizace

Rok uplatnění

2025

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

CHEMICAL PAPERS

ISSN

2585-7290

e-ISSN

1336-9075

Svazek periodika

79

Číslo periodika v rámci svazku

7

Stát vydavatele periodika

SK - Slovenská republika

Počet stran výsledku

16

Strana od-do

4213-4228

Kód UT WoS článku

001481357600001

EID výsledku v databázi Scopus

2-s2.0-105004302854