Abrasive and erosive wear of technical materials

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F62156489%3A43210%2F11%3A00174604" target="_blank" >RIV/62156489:43210/11:00174604 - isvavai.cz</a>

Výsledek na webu

<a href="http://dx.doi.org/10.11118/actaun201159030013" target="_blank" >http://dx.doi.org/10.11118/actaun201159030013</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.11118/actaun201159030013" target="_blank" >10.11118/actaun201159030013</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Abrasive and erosive wear of technical materials

Popis výsledku v původním jazyce

Operating reliability of agricultural, transport and construction machines is in a considerable degree influenced by corrosion and wear. These sorts of damage significantly influence the costs for the restoration of mechanical components, as well as their service and repairs. This article deals with comparing the abrasive and erosive wear of technical materials (soft steel, wear-resisting steel, ledeburitic cast-iron, cemented carbides). A test of the abrasive wear by means of bound particles was carried out on an apparatus with a corundum abrasive cloth. The erosive wear was made in a testing mechanism manufactured by the firm Kovo Staněk Ltd., which simulated the operating conditions by jetting with both spheroidal granulate and angular crushed material. The comparative resistance against the abrasive wear of the tested materials varied by three degrees. The testing conditions and the working means affected not only the wear formulated in absoulute units (g, mm3), but also the propor

Název v anglickém jazyce

Abrasive and erosive wear of technical materials

Popis výsledku anglicky

Operating reliability of agricultural, transport and construction machines is in a considerable degree influenced by corrosion and wear. These sorts of damage significantly influence the costs for the restoration of mechanical components, as well as their service and repairs. This article deals with comparing the abrasive and erosive wear of technical materials (soft steel, wear-resisting steel, ledeburitic cast-iron, cemented carbides). A test of the abrasive wear by means of bound particles was carried out on an apparatus with a corundum abrasive cloth. The erosive wear was made in a testing mechanism manufactured by the firm Kovo Staněk Ltd., which simulated the operating conditions by jetting with both spheroidal granulate and angular crushed material. The comparative resistance against the abrasive wear of the tested materials varied by three degrees. The testing conditions and the working means affected not only the wear formulated in absoulute units (g, mm3), but also the propor

Druh

J_x - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)

CEP obor

GB - Zemědělské stroje a stavby

OECD FORD obor

—

Projekt

—

Návaznosti

S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2011

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis

ISSN

1211-8516

e-ISSN

—

Svazek periodika

59

Číslo periodika v rámci svazku

3

Stát vydavatele periodika

CZ - Česká republika

Počet stran výsledku

9

Strana od-do

13-21

Kód UT WoS článku

—

EID výsledku v databázi Scopus

—