Combined systems of anticorrosion protection

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F62156489%3A43210%2F11%3A00176045" target="_blank" >RIV/62156489:43210/11:00176045 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Combined systems of anticorrosion protection

Popis výsledku v původním jazyce

Corrosion degradation of steel machine parts is a worldwide problem. This article monitors anticorrosion protection of pure zinc-based coatings and a combination of zinc protection with a paint system, so called duplex system. There have been selected asteel plate class 11 323 as the base material. There have been prepared samples sized 160 x 65 x 1 mm, on which anticorrosion coating was made. There were used technologies of zinc dipping, metallization and a duplex system. Every individual sample has been tested by a bending test according to the norm ČSN EN ISO 8401. There was analyzed the thickness as well as the weight of the coating. Afterwards, in order to find out the anticorrosion propensity of the individual protective systems, there has beenprocessed a salt-spray test according to the norm ČSN ISO 9227.

Název v anglickém jazyce

Combined systems of anticorrosion protection

Popis výsledku anglicky

Corrosion degradation of steel machine parts is a worldwide problem. This article monitors anticorrosion protection of pure zinc-based coatings and a combination of zinc protection with a paint system, so called duplex system. There have been selected asteel plate class 11 323 as the base material. There have been prepared samples sized 160 x 65 x 1 mm, on which anticorrosion coating was made. There were used technologies of zinc dipping, metallization and a duplex system. Every individual sample has been tested by a bending test according to the norm ČSN EN ISO 8401. There was analyzed the thickness as well as the weight of the coating. Afterwards, in order to find out the anticorrosion propensity of the individual protective systems, there has beenprocessed a salt-spray test according to the norm ČSN ISO 9227.

Druh

C - Kapitola v odborné knize

CEP obor

JK - Koroze a povrchové úpravy materiálu

OECD FORD obor

—

Projekt

—

Návaznosti

Z - Vyzkumny zamer (s odkazem do CEZ)

Rok uplatnění

2011

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název knihy nebo sborníku

Deterioration, Dependability, Diagnostics

ISBN

978-80-260-0633-6

Počet stran výsledku

8

Strana od-do

249-256

Počet stran knihy

266

Název nakladatele

University of Defence Brno

Místo vydání

Brno

Kód UT WoS kapitoly

—