Surface Structure Evaluation of Functional Surfaces after Plasma Nitriding of Barrel Steel 42CrMo4

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F62156489%3A43210%2F19%3A43917618" target="_blank" >RIV/62156489:43210/19:43917618 - isvavai.cz</a>

Výsledek na webu

<a href="https://doi.org/10.1149/09501.0407ecst" target="_blank" >https://doi.org/10.1149/09501.0407ecst</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.1149/09501.0407ecst" target="_blank" >10.1149/09501.0407ecst</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Surface Structure Evaluation of Functional Surfaces after Plasma Nitriding of Barrel Steel 42CrMo4

Popis výsledku v původním jazyce

With increasing demands on the functional properties of machine parts, the demands on the quality of their surfaces are increasing. Any technological method used to realize the surface of functional surfaces leaves unevenness, which is essential for the function of these surfaces. The increase of the functional properties of functional surfaces can be realized by using the plasma nitriding method. However, the used diffusion technology also changes the surface structure of the components. The presented paper deals with evaluation of the change of the structure of the ground functional surfaces of barrel steel 42CrMo4 after plasma nitriding. Furthermore, the change in surface hardness and friction and wear coefficient, which have a direct effect on the functional properties, was analysed. The surface structure deteriorates and the friction coefficient is slightly increased after plasma nitriding. However, the wear coefficient reaches lower values, which, together with an increase in surface hardness, result in the use of this technology for exposed components.

Název v anglickém jazyce

Surface Structure Evaluation of Functional Surfaces after Plasma Nitriding of Barrel Steel 42CrMo4

Popis výsledku anglicky

With increasing demands on the functional properties of machine parts, the demands on the quality of their surfaces are increasing. Any technological method used to realize the surface of functional surfaces leaves unevenness, which is essential for the function of these surfaces. The increase of the functional properties of functional surfaces can be realized by using the plasma nitriding method. However, the used diffusion technology also changes the surface structure of the components. The presented paper deals with evaluation of the change of the structure of the ground functional surfaces of barrel steel 42CrMo4 after plasma nitriding. Furthermore, the change in surface hardness and friction and wear coefficient, which have a direct effect on the functional properties, was analysed. The surface structure deteriorates and the friction coefficient is slightly increased after plasma nitriding. However, the wear coefficient reaches lower values, which, together with an increase in surface hardness, result in the use of this technology for exposed components.

Druh

D - Stať ve sborníku

CEP obor

—

OECD FORD obor

20506 - Coating and films

Projekt

—

Návaznosti

I - Institucionalni podpora na dlouhodoby koncepcni rozvoj vyzkumne organizace

Rok uplatnění

2019

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

ECS Transactions

ISBN

—

ISSN

1938-5862

e-ISSN

1938-6737

Počet stran výsledku

12

Strana od-do

407-418

Název nakladatele

The Electrochemical Society

Místo vydání

Pennington

Místo konání akce

Brno

Datum konání akce

25. 8. 2019

Typ akce podle státní příslušnosti

WRD - Celosvětová akce

Kód UT WoS článku

—