Shape Stability of Particleboards Covered with Decorative Veneers

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F62156489%3A43410%2F13%3A00208333" target="_blank" >RIV/62156489:43410/13:00208333 - isvavai.cz</a>

Výsledek na webu

<a href="http://dx.doi.org/10.5552/drind.2013.1234" target="_blank" >http://dx.doi.org/10.5552/drind.2013.1234</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.5552/drind.2013.1234" target="_blank" >10.5552/drind.2013.1234</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Shape Stability of Particleboards Covered with Decorative Veneers

Popis výsledku v původním jazyce

The paper summarizes results of research work aimed at the determination of shape stability, modulus of rupture (MOR) and modulus of elasticity (MOE) of components manufactured of particle boards, which were veneered from their tight side by the decorative veneer of American walnut (Juglans nigra) 0.6 mm thick and on the underside by decorative veneers of different species (Picea abies and Fagus sylvatica 0.6--1.5 mm in thickness or by a countermove foil of 85--90 g/m2 surface weight. Subsequently, measurements were carried out of the shape stability (warping) of test specimens cut from various combinations of surface-finished boards. These test specimens were air conditioned in three different environments. At the same time, values were determined ofbending strength and modulus of rupture with respect to the direction of fibres of sheathing materials. It has been found that the lowest values of warping were achieved at material combinations consisting of American walnut of a thicknes

Název v anglickém jazyce

Shape Stability of Particleboards Covered with Decorative Veneers

Popis výsledku anglicky

The paper summarizes results of research work aimed at the determination of shape stability, modulus of rupture (MOR) and modulus of elasticity (MOE) of components manufactured of particle boards, which were veneered from their tight side by the decorative veneer of American walnut (Juglans nigra) 0.6 mm thick and on the underside by decorative veneers of different species (Picea abies and Fagus sylvatica 0.6--1.5 mm in thickness or by a countermove foil of 85--90 g/m2 surface weight. Subsequently, measurements were carried out of the shape stability (warping) of test specimens cut from various combinations of surface-finished boards. These test specimens were air conditioned in three different environments. At the same time, values were determined ofbending strength and modulus of rupture with respect to the direction of fibres of sheathing materials. It has been found that the lowest values of warping were achieved at material combinations consisting of American walnut of a thicknes

Druh

J_x - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)

CEP obor

JI - Kompositní materiály

OECD FORD obor

—

Projekt

<a href="/cs/project/EE2.3.20.0269" target="_blank" >EE2.3.20.0269: Vytvoření mezinárodního vědecko-výzkumného týmu pro vývoj nových materiálů na bázi dřeva</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2013

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Drvna Industrija

ISSN

0012-6772

e-ISSN

—

Svazek periodika

64

Číslo periodika v rámci svazku

3

Stát vydavatele periodika

HR - Chorvatská republika

Počet stran výsledku

10

Strana od-do

211-220

Kód UT WoS článku

325232500005

EID výsledku v databázi Scopus

—