Artificial Weathering of Contact-Charred Wood-The Effect of Modification Duration, Wood Species and Material Density

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F62156489%3A43410%2F22%3A43921737" target="_blank" >RIV/62156489:43410/22:43921737 - isvavai.cz</a>

Výsledek na webu

<a href="https://doi.org/10.3390/ma15113951" target="_blank" >https://doi.org/10.3390/ma15113951</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.3390/ma15113951" target="_blank" >10.3390/ma15113951</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Artificial Weathering of Contact-Charred Wood-The Effect of Modification Duration, Wood Species and Material Density

Popis výsledku v původním jazyce

A relevant issue with charred exteriors is the inconsistency of the result, which makes service life predictions complicated. Contact charring enables the creation of a very evenly modified surface with accurate control of temperature and modification time, but the weathering properties are questionable. This paper evaluated the effect of the modification time relative to char layer and transition zone thickness, wood species and material density in an artificial weathering test. The results revealed higher color stability in connection to longer modification time, but also an increase in the cracked surface area. Cracking was heavily dependent on the modification regime and increased with increasing char and transition zone thicknesses. Dense spruce had the highest color stability with the most severe modification regime, but char layer thickness varied more than on other wood types. Furthermore, species-dependent cracking patterns affected the final result as the small-scale flaking experienced by birch increased the washing off of char. It is likely an even higher modification temperature with a shorter modification time is needed to produce sufficient weathering resistance suitable for exterior uses.

Název v anglickém jazyce

Artificial Weathering of Contact-Charred Wood-The Effect of Modification Duration, Wood Species and Material Density

Popis výsledku anglicky

A relevant issue with charred exteriors is the inconsistency of the result, which makes service life predictions complicated. Contact charring enables the creation of a very evenly modified surface with accurate control of temperature and modification time, but the weathering properties are questionable. This paper evaluated the effect of the modification time relative to char layer and transition zone thickness, wood species and material density in an artificial weathering test. The results revealed higher color stability in connection to longer modification time, but also an increase in the cracked surface area. Cracking was heavily dependent on the modification regime and increased with increasing char and transition zone thicknesses. Dense spruce had the highest color stability with the most severe modification regime, but char layer thickness varied more than on other wood types. Furthermore, species-dependent cracking patterns affected the final result as the small-scale flaking experienced by birch increased the washing off of char. It is likely an even higher modification temperature with a shorter modification time is needed to produce sufficient weathering resistance suitable for exterior uses.

Druh

J_imp - Článek v periodiku v databázi Web of Science

CEP obor

—

OECD FORD obor

20501 - Materials engineering

Projekt

<a href="/cs/project/GJ19-25171Y" target="_blank" >GJ19-25171Y: Hygro-termo-mechanické chování modifikovaných materiálů na bázi dřeva na různých úrovních pozorování</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2022

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Materials

ISSN

1996-1944

e-ISSN

1996-1944

Svazek periodika

15

Číslo periodika v rámci svazku

11

Stát vydavatele periodika

CH - Švýcarská konfederace

Počet stran výsledku

15

Strana od-do

3951

Kód UT WoS článku

000808631500001

EID výsledku v databázi Scopus

2-s2.0-85131826230