The effect of moisture content over the fibre saturation points on the impact strength of wood

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F62156489%3A43410%2F24%3A43924858" target="_blank" >RIV/62156489:43410/24:43924858 - isvavai.cz</a>

Výsledek na webu

<a href="https://doi.org/10.1098/rsos.231685" target="_blank" >https://doi.org/10.1098/rsos.231685</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.1098/rsos.231685" target="_blank" >10.1098/rsos.231685</a>

Jazyk výsledku

angličtina

Název v původním jazyce

The effect of moisture content over the fibre saturation points on the impact strength of wood

Popis výsledku v původním jazyce

The article&apos;s main aim is to assess the mechanical behaviour of linden under high-rate loadings (impact) and its change due to changes in moisture content (MC) over fibre saturation point. For assessing the mechanical properties of green wood, mainly the data of the dried wood is not applicable since the moisture content can drastically affect the mechanical properties of the wood. By testing both dried and high-moisture-content wood, we can understand a general viewpoint toward the effect of the moisture content on the impact behaviour of the wood. Several test samples were made of linden wood with different moisture content levels of 11%, 60% and 160%. A drop-weight impact machine tested the specimens to measure the reaction force of the hammer during a very short impact period. The results of the tests were parameters such as force–time chart, the maximum force required for crack initiation, the impact bending strength (IBS) and the work needed for crack initiation. The results indicated an increase in MC decreases the maximum force, work required for crack initiation and IBS drastically. However, when MC exceeded the fibre saturation point (FSP), there was no further influence on the force pattern and maximum required force.

Název v anglickém jazyce

The effect of moisture content over the fibre saturation points on the impact strength of wood

Popis výsledku anglicky

The article&apos;s main aim is to assess the mechanical behaviour of linden under high-rate loadings (impact) and its change due to changes in moisture content (MC) over fibre saturation point. For assessing the mechanical properties of green wood, mainly the data of the dried wood is not applicable since the moisture content can drastically affect the mechanical properties of the wood. By testing both dried and high-moisture-content wood, we can understand a general viewpoint toward the effect of the moisture content on the impact behaviour of the wood. Several test samples were made of linden wood with different moisture content levels of 11%, 60% and 160%. A drop-weight impact machine tested the specimens to measure the reaction force of the hammer during a very short impact period. The results of the tests were parameters such as force–time chart, the maximum force required for crack initiation, the impact bending strength (IBS) and the work needed for crack initiation. The results indicated an increase in MC decreases the maximum force, work required for crack initiation and IBS drastically. However, when MC exceeded the fibre saturation point (FSP), there was no further influence on the force pattern and maximum required force.

Druh

J_imp - Článek v periodiku v databázi Web of Science

CEP obor

—

OECD FORD obor

40102 - Forestry

Projekt

<a href="/cs/project/LL1909" target="_blank" >LL1909: Dynamika stromu: popis mechanické odezvy na zatížení</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2024

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Royal Society Open Science

ISSN

2054-5703

e-ISSN

2054-5703

Svazek periodika

11

Číslo periodika v rámci svazku

2

Stát vydavatele periodika

GB - Spojené království Velké Británie a Severního Irska

Počet stran výsledku

9

Strana od-do

231685

Kód UT WoS článku

001176171600002

EID výsledku v databázi Scopus

2-s2.0-85186330058