Horizontal Distribution of Liquid in an Over-Row Sprayer with a Secondary Air Blower
Identifikátory výsledku
Kód výsledku v IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F62156489%3A43510%2F24%3A43925776" target="_blank" >RIV/62156489:43510/24:43925776 - isvavai.cz</a>
Výsledek na webu
<a href="https://doi.org/10.3390/app14199036" target="_blank" >https://doi.org/10.3390/app14199036</a>
DOI - Digital Object Identifier
<a href="http://dx.doi.org/10.3390/app14199036" target="_blank" >10.3390/app14199036</a>
Alternativní jazyky
Jazyk výsledku
angličtina
Název v původním jazyce
Horizontal Distribution of Liquid in an Over-Row Sprayer with a Secondary Air Blower
Popis výsledku v původním jazyce
The aim of this study was to determine the influence of boom height above a crop stand and the spacing between nozzles and diffusers in an over-row sprayer on the uniformity of the horizontal spray distribution and the uniformity of the air velocity distribution. The experimental setup involved a prototype over-row sprayer equipped with a boom with a working width of 8 m and ten air diffusers with spray nozzles. Air diffusers were connected to one or two nozzles each, and they were installed on the boom at intervals of 60, 80, and 90 cm. Terminal airflow velocity at a canopy is determined by the height of a sprayer boom and the diffuser spacing, ranging from around 2 m s-1 to around 27 m s-1. The sprayer boom should be positioned at a height of 50 cm above a crop stand due to the difference between the minimum and maximum airflow velocities. The horizontal spray distribution was more uniform when the sprayer was equipped with hollow-cone nozzles instead of flat-fan nozzles; hollow-cone nozzles should be applied if the distance between nozzles needs to be adjusted to the row width and row spacing. The analyzed coefficients did not exceed 10% when the boom was positioned 50 cm above the crop stand and when the nozzles were spaced 80 cm apart, which suggests that, in this configuration, sprayers equipped with hollow-cone nozzles can also be applied to close-grown crops.
Název v anglickém jazyce
Horizontal Distribution of Liquid in an Over-Row Sprayer with a Secondary Air Blower
Popis výsledku anglicky
The aim of this study was to determine the influence of boom height above a crop stand and the spacing between nozzles and diffusers in an over-row sprayer on the uniformity of the horizontal spray distribution and the uniformity of the air velocity distribution. The experimental setup involved a prototype over-row sprayer equipped with a boom with a working width of 8 m and ten air diffusers with spray nozzles. Air diffusers were connected to one or two nozzles each, and they were installed on the boom at intervals of 60, 80, and 90 cm. Terminal airflow velocity at a canopy is determined by the height of a sprayer boom and the diffuser spacing, ranging from around 2 m s-1 to around 27 m s-1. The sprayer boom should be positioned at a height of 50 cm above a crop stand due to the difference between the minimum and maximum airflow velocities. The horizontal spray distribution was more uniform when the sprayer was equipped with hollow-cone nozzles instead of flat-fan nozzles; hollow-cone nozzles should be applied if the distance between nozzles needs to be adjusted to the row width and row spacing. The analyzed coefficients did not exceed 10% when the boom was positioned 50 cm above the crop stand and when the nozzles were spaced 80 cm apart, which suggests that, in this configuration, sprayers equipped with hollow-cone nozzles can also be applied to close-grown crops.
Klasifikace
Druh
J<sub>imp</sub> - Článek v periodiku v databázi Web of Science
CEP obor
—
OECD FORD obor
40101 - Agriculture
Návaznosti výsledku
Projekt
—
Návaznosti
I - Institucionalni podpora na dlouhodoby koncepcni rozvoj vyzkumne organizace
Ostatní
Rok uplatnění
2024
Kód důvěrnosti údajů
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů
Údaje specifické pro druh výsledku
Název periodika
Applied Sciences
ISSN
2076-3417
e-ISSN
2076-3417
Svazek periodika
14
Číslo periodika v rámci svazku
19
Stát vydavatele periodika
CH - Švýcarská konfederace
Počet stran výsledku
14
Strana od-do
9036
Kód UT WoS článku
001332206100001
EID výsledku v databázi Scopus
2-s2.0-85206573630