Fuel properties of hydroprocessed rapeseed oil

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F62243136%3A_____%2F10%3A%230000061" target="_blank" >RIV/62243136:_____/10:#0000061 - isvavai.cz</a>

Nalezeny alternativní kódy

RIV/62243136:_____/10:#0000117 RIV/60461373:22320/10:00023795

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Fuel properties of hydroprocessed rapeseed oil

Popis výsledku v původním jazyce

This paper deals with the hydroprocessing of rapeseed oil as a source of hydrocarbon-based biodiesel. Rapeseed oil was hydroprocessed in a laboratory flow reactor under four combinations of reaction conditions at temperatures 310 and 360 _C and under hydrogen pressure of 7 and 15 MPa. A commercial hydrotreating Ni?Mo/alumina catalyst was used. Reaction products contained mostly n-heptadecane and n-octadecane accompanied by low concentrations of other n-alkanes and i-alkanes. Reaction product obtained at360 _C and 7 MPa was blended into mineral diesel fuel in several concentration levels ranging from 5 to 30 wt.%. It was found, that most of the standard parameters were similar to or better than those of pure mineral diesel. On the other hand, low-temperature properties were worse, even after addition of high concentrations of flow improvers.

Název v anglickém jazyce

Fuel properties of hydroprocessed rapeseed oil

Popis výsledku anglicky

This paper deals with the hydroprocessing of rapeseed oil as a source of hydrocarbon-based biodiesel. Rapeseed oil was hydroprocessed in a laboratory flow reactor under four combinations of reaction conditions at temperatures 310 and 360 _C and under hydrogen pressure of 7 and 15 MPa. A commercial hydrotreating Ni?Mo/alumina catalyst was used. Reaction products contained mostly n-heptadecane and n-octadecane accompanied by low concentrations of other n-alkanes and i-alkanes. Reaction product obtained at360 _C and 7 MPa was blended into mineral diesel fuel in several concentration levels ranging from 5 to 30 wt.%. It was found, that most of the standard parameters were similar to or better than those of pure mineral diesel. On the other hand, low-temperature properties were worse, even after addition of high concentrations of flow improvers.

Druh

J_x - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)

CEP obor

CI - Průmyslová chemie a chemické inženýrství

OECD FORD obor

—

Projekt

<a href="/cs/project/FT-TA3%2F074" target="_blank" >FT-TA3/074: *Využití rostlinných olejů a glycerinu pro výrobu motorových paliv.</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2010

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Fuel

ISSN

0016-2361

e-ISSN

—

Svazek periodika

89

Číslo periodika v rámci svazku

6

Stát vydavatele periodika

NL - Nizozemsko

Počet stran výsledku

5

Strana od-do

—

Kód UT WoS článku

—

EID výsledku v databázi Scopus

—