Fischer?Tropsch product as a co-feed for refinery hydrocracking unit

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F62243136%3A_____%2F13%3AMPO10CL" target="_blank" >RIV/62243136:_____/13:MPO10CL - isvavai.cz</a>

Nalezeny alternativní kódy

RIV/60461373:22320/13:43895506

Výsledek na webu

<a href="http://www.sciencedirect.com/science/article/pii/S0016236112006564" target="_blank" >http://www.sciencedirect.com/science/article/pii/S0016236112006564</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.1016/j.fuel.2012.08.020" target="_blank" >10.1016/j.fuel.2012.08.020</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Fischer?Tropsch product as a co-feed for refinery hydrocracking unit

Popis výsledku v původním jazyce

A flow bench scale fix-bed reactor was used for hydrocracking experiments, which were carried out over a commercial Ni?W/alumina catalyst under hydrogen pressure of 18 MPa. Two feeds were separately processed at temperature levels of 390, 410 and 430 _C:vacuum distillate containing 10 wt.% of Fischer?Tropsch (FT) product prepared in separate experiments and neat vacuum distillate used as a reference material. The hydrocracking products were fractionated by distillation into naphtha, diesel oil and residue. All samples were then analyzed using several analytical methods in order to compare properties of the products obtained from different feeds. All products obtained from the feed containing FT product had lower or comparable density and sulfur content to products obtained from neat vacuum distillate. Differences in hydrocarbon group-type composition were observed in both naphtha and diesel fractions. The impact of modification of vacuum distillate by FT product on the properties of i

Název v anglickém jazyce

Fischer?Tropsch product as a co-feed for refinery hydrocracking unit

Popis výsledku anglicky

A flow bench scale fix-bed reactor was used for hydrocracking experiments, which were carried out over a commercial Ni?W/alumina catalyst under hydrogen pressure of 18 MPa. Two feeds were separately processed at temperature levels of 390, 410 and 430 _C:vacuum distillate containing 10 wt.% of Fischer?Tropsch (FT) product prepared in separate experiments and neat vacuum distillate used as a reference material. The hydrocracking products were fractionated by distillation into naphtha, diesel oil and residue. All samples were then analyzed using several analytical methods in order to compare properties of the products obtained from different feeds. All products obtained from the feed containing FT product had lower or comparable density and sulfur content to products obtained from neat vacuum distillate. Differences in hydrocarbon group-type composition were observed in both naphtha and diesel fractions. The impact of modification of vacuum distillate by FT product on the properties of i

Druh

J_x - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)

CEP obor

CC - Organická chemie

OECD FORD obor

—

Projekt

<a href="/cs/project/2A-3TP1%2F063" target="_blank" >2A-3TP1/063: *Zpracování produktů Fischer-Tropschovy syntézy na alternativní motorová paliva a ostatní rafinérské produkty a výzkum jejich vlastností</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2013

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Fuel

ISSN

0016-2361

e-ISSN

—

Svazek periodika

105

Číslo periodika v rámci svazku

7

Stát vydavatele periodika

GB - Spojené království Velké Británie a Severního Irska

Počet stran výsledku

8

Strana od-do

432-439

Kód UT WoS článku

000311935400045

EID výsledku v databázi Scopus

—