One-step direct catalytic sewage sludge liquefaction over a sulfided metal catalyst

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F62243136%3A_____%2F22%3AN0000030" target="_blank" >RIV/62243136:_____/22:N0000030 - isvavai.cz</a>

Výsledek na webu

<a href="https://www.icct.cz/cs/minule-icct/2022" target="_blank" >https://www.icct.cz/cs/minule-icct/2022</a>

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

One-step direct catalytic sewage sludge liquefaction over a sulfided metal catalyst

Popis výsledku v původním jazyce

Sewage sludge residue from wastewater treatment could be transformed to more valuable products. Direct one-step catalytic liquefaction tests were performed to produce synthetic crude and other compounds such as ethylene or propylene from the organic part of the industrial sewage sludge. The catalyst was a commercial metal sulfided hydrocracking NiW/SiO2-Al2O3 material. The reaction was performed with 20 g of dried sewage sludge, 50 g of tetralin and 2 g of catalyst in a batch reactor at 420 °C for 1 h (PH2=5 MPa at room temperature). The feedstock and products were analysed (GC/FID-TCD, elemental H, C, N, S% analysis, TGA (O2 and N2) and ATRFTIR). For the gases, the main products were ethane, methane, CO2 and CO. Liquid products in the boiling range of 50-390 °C were obtained. Tetralin was not an inert solvent implying a lower yield to liquids compared to the standard direct coal liquefaction

Název v anglickém jazyce

One-step direct catalytic sewage sludge liquefaction over a sulfided metal catalyst

Popis výsledku anglicky

Sewage sludge residue from wastewater treatment could be transformed to more valuable products. Direct one-step catalytic liquefaction tests were performed to produce synthetic crude and other compounds such as ethylene or propylene from the organic part of the industrial sewage sludge. The catalyst was a commercial metal sulfided hydrocracking NiW/SiO2-Al2O3 material. The reaction was performed with 20 g of dried sewage sludge, 50 g of tetralin and 2 g of catalyst in a batch reactor at 420 °C for 1 h (PH2=5 MPa at room temperature). The feedstock and products were analysed (GC/FID-TCD, elemental H, C, N, S% analysis, TGA (O2 and N2) and ATRFTIR). For the gases, the main products were ethane, methane, CO2 and CO. Liquid products in the boiling range of 50-390 °C were obtained. Tetralin was not an inert solvent implying a lower yield to liquids compared to the standard direct coal liquefaction

Druh

D - Stať ve sborníku

CEP obor

—

OECD FORD obor

20400 - Chemical engineering

Projekt

—

Návaznosti

I - Institucionalni podpora na dlouhodoby koncepcni rozvoj vyzkumne organizace

Rok uplatnění

2022

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

ICCT 2022

ISBN

978-80-88307-11-2

ISSN

—

e-ISSN

—

Počet stran výsledku

6

Strana od-do

—

Název nakladatele

—

Místo vydání

Mikulov

Místo konání akce

Mikulov

Datum konání akce

1. 1. 2022

Typ akce podle státní příslušnosti

EUR - Evropská akce

Kód UT WoS článku

—