Process of electrospinning with an emphasis to the rheological behaviour of PVB solutions

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F67985874%3A_____%2F12%3A00380059" target="_blank" >RIV/67985874:_____/12:00380059 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Process of electrospinning with an emphasis to the rheological behaviour of PVB solutions

Popis výsledku v původním jazyce

The process of electrospinning is a low-cost procedure that creates nanofibres through an electrically charged jet of polymer solution or polymer melt. Electrospinning process consists schematically of a pipette holding the polymer solution, two electrodes, a DC voltage supply in the kV range, and a grounded collector. The high voltage causes drawing of the polymer drop from the tip of the pipette into a fibre. The electrically charged jets are collected as a web of fibres on the surface of a grounded collector. By virtue of their high surface-to-volume ratio, the electrospun nanofibre sheets are used as protective clothing and filtration, tissue scaffolding and other biomedical applications, reinforcement in composites, and optical, electronic and high performance applications. The emphasis will be paid to correlation between electrorheological behaviour of various polyvinylbutyral (PVB) solutions and quality of the corresponding nanofibre webs.

Název v anglickém jazyce

Process of electrospinning with an emphasis to the rheological behaviour of PVB solutions

Popis výsledku anglicky

The process of electrospinning is a low-cost procedure that creates nanofibres through an electrically charged jet of polymer solution or polymer melt. Electrospinning process consists schematically of a pipette holding the polymer solution, two electrodes, a DC voltage supply in the kV range, and a grounded collector. The high voltage causes drawing of the polymer drop from the tip of the pipette into a fibre. The electrically charged jets are collected as a web of fibres on the surface of a grounded collector. By virtue of their high surface-to-volume ratio, the electrospun nanofibre sheets are used as protective clothing and filtration, tissue scaffolding and other biomedical applications, reinforcement in composites, and optical, electronic and high performance applications. The emphasis will be paid to correlation between electrorheological behaviour of various polyvinylbutyral (PVB) solutions and quality of the corresponding nanofibre webs.

Druh

D - Stať ve sborníku

CEP obor

BK - Mechanika tekutin

OECD FORD obor

—

Projekt

<a href="/cs/project/GAP105%2F11%2F2342" target="_blank" >GAP105/11/2342: Evaluace procesu elektrozvlákňování pomocí elektroreologických měření</a><br>

Návaznosti

I - Institucionalni podpora na dlouhodoby koncepcni rozvoj vyzkumne organizace

Rok uplatnění

2012

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

Advances in Fluid Mechanics and Heat & Mass Transfer

ISBN

978-1-61804-114-2

ISSN

—

e-ISSN

—

Počet stran výsledku

5

Strana od-do

159-163

Název nakladatele

WSEAS Press

Místo vydání

Istanbul

Místo konání akce

Istanbul

Datum konání akce

21. 8. 2012

Typ akce podle státní příslušnosti

WRD - Celosvětová akce

Kód UT WoS článku

—