The impact of low temperature on the efficiency of coagulation/flocculation process in drinking water treatment

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F67985874%3A_____%2F26%3A00644327" target="_blank" >RIV/67985874:_____/26:00644327 - isvavai.cz</a>

Výsledek na webu

<a href="https://www.mdpi.com/2076-3298/13/1/40" target="_blank" >https://www.mdpi.com/2076-3298/13/1/40</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.3390/environments13010040" target="_blank" >10.3390/environments13010040</a>

Jazyk výsledku

angličtina

Název v původním jazyce

The impact of low temperature on the efficiency of coagulation/flocculation process in drinking water treatment

Popis výsledku v původním jazyce

The final stage of the drinking water treatment process yields two distinct outputs: treated water and the resulting sludge. This sludge is composed of raw water impurities, coagulation and flocculation agents, and various other additives. In any volume of processed drinking water, the continuous production of sludge is not negligible, leading to a significant environmental impact. This is particularly concerning when aluminium-based agents are used, as these compounds are strongly implicated in potential detrimental health risks. This situation is significantly worsened when raw water temperature approaches zero, as the treatment process efficiency is greatly diminished. Drinking water treatment at low temperatures faces a culmination of adverse effects, including a lower rate of hydrolysis and a reduced floc size, both of which negatively impact sedimentation. An effective strategy for suppressing the high dosing of chemicals is the suitable choice of ratio between acidity and the basicity of the treated water. Simply maintaining the pH value that was optimised for higher temperatures is detrimental, leading to, among other issues, increased sludge accumulation. Therefore, attention should instead be concentrated on the pOH value. A simple algebraic relation is proposed for converting the optimised pH value for higher temperatures to an optimum value for more moderate or low-temperature conditions. The application of this method results in a reduction in the amount of chemical agents required and consequently a reduction in the volume of sludge produced.

Název v anglickém jazyce

The impact of low temperature on the efficiency of coagulation/flocculation process in drinking water treatment

Popis výsledku anglicky

The final stage of the drinking water treatment process yields two distinct outputs: treated water and the resulting sludge. This sludge is composed of raw water impurities, coagulation and flocculation agents, and various other additives. In any volume of processed drinking water, the continuous production of sludge is not negligible, leading to a significant environmental impact. This is particularly concerning when aluminium-based agents are used, as these compounds are strongly implicated in potential detrimental health risks. This situation is significantly worsened when raw water temperature approaches zero, as the treatment process efficiency is greatly diminished. Drinking water treatment at low temperatures faces a culmination of adverse effects, including a lower rate of hydrolysis and a reduced floc size, both of which negatively impact sedimentation. An effective strategy for suppressing the high dosing of chemicals is the suitable choice of ratio between acidity and the basicity of the treated water. Simply maintaining the pH value that was optimised for higher temperatures is detrimental, leading to, among other issues, increased sludge accumulation. Therefore, attention should instead be concentrated on the pOH value. A simple algebraic relation is proposed for converting the optimised pH value for higher temperatures to an optimum value for more moderate or low-temperature conditions. The application of this method results in a reduction in the amount of chemical agents required and consequently a reduction in the volume of sludge produced.

Druh

J_imp - Článek v periodiku v databázi Web of Science

CEP obor

—

OECD FORD obor

10511 - Environmental sciences (social aspects to be 5.7)

Projekt

—

Návaznosti

I - Institucionalni podpora na dlouhodoby koncepcni rozvoj vyzkumne organizace

Rok uplatnění

2026

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Environments

ISSN

2076-3298

e-ISSN

2076-3298

Svazek periodika

13

Číslo periodika v rámci svazku

1

Stát vydavatele periodika

CH - Švýcarská konfederace

Počet stran výsledku

17

Strana od-do

40

Kód UT WoS článku

001670258900001

EID výsledku v databázi Scopus

2-s2.0-105028850356