Microstructure and mechanical properties of rare-earth doped Si3N4 and Si3N4/SiC ceramics
Identifikátory výsledku
Kód výsledku v IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F68081723%3A_____%2F10%3A00353412" target="_blank" >RIV/68081723:_____/10:00353412 - isvavai.cz</a>
Výsledek na webu
—
DOI - Digital Object Identifier
—
Alternativní jazyky
Jazyk výsledku
angličtina
Název v původním jazyce
Microstructure and mechanical properties of rare-earth doped Si3N4 and Si3N4/SiC ceramics
Popis výsledku v původním jazyce
Microstructure and mechanical properties of Si3N4 and Si3N4 + SiC nanocomposites sintered with rare-earth oxide additives (La2O3, Y2O3, Yb2O3 and Lu2O3) have been investigated. The composites exhibited smaller grain diameter compared to that of monolithic materials. The aspect ratio of ?-Si3N4 grains increased with a decreasing ionic radius of rare-earth elements in the Si3N4 monoliths as well as in the Si3N4-SiC nanocomposites. The hardness of both systems increased with a decreasing ionic radius of rare-earth element. The fracture toughness of the materials with coarser microstructure and higher aspect ratio was higher due to the more frequent toughening mechanisms. No significant difference between strength values of monoliths and composites was observed and the strength in the composites was determined mainly by the present processing flaws. Significantly improved creep resistance was observed in the case of composites and for materials with smaller ionic radius of RE3+ .
Název v anglickém jazyce
Microstructure and mechanical properties of rare-earth doped Si3N4 and Si3N4/SiC ceramics
Popis výsledku anglicky
Microstructure and mechanical properties of Si3N4 and Si3N4 + SiC nanocomposites sintered with rare-earth oxide additives (La2O3, Y2O3, Yb2O3 and Lu2O3) have been investigated. The composites exhibited smaller grain diameter compared to that of monolithic materials. The aspect ratio of ?-Si3N4 grains increased with a decreasing ionic radius of rare-earth elements in the Si3N4 monoliths as well as in the Si3N4-SiC nanocomposites. The hardness of both systems increased with a decreasing ionic radius of rare-earth element. The fracture toughness of the materials with coarser microstructure and higher aspect ratio was higher due to the more frequent toughening mechanisms. No significant difference between strength values of monoliths and composites was observed and the strength in the composites was determined mainly by the present processing flaws. Significantly improved creep resistance was observed in the case of composites and for materials with smaller ionic radius of RE3+ .
Klasifikace
Druh
J<sub>x</sub> - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)
CEP obor
JH - Keramika, žáruvzdorné materiály a skla
OECD FORD obor
—
Návaznosti výsledku
Projekt
—
Návaznosti
Z - Vyzkumny zamer (s odkazem do CEZ)
Ostatní
Rok uplatnění
2010
Kód důvěrnosti údajů
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů
Údaje specifické pro druh výsledku
Název periodika
Advances in Science and Technology
ISSN
1662-0356
e-ISSN
—
Svazek periodika
65
Číslo periodika v rámci svazku
-
Stát vydavatele periodika
CH - Švýcarská konfederace
Počet stran výsledku
8
Strana od-do
—
Kód UT WoS článku
—
EID výsledku v databázi Scopus
—