Laminated alumina/zirconia ceramic composites prepared by electrophoretic

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F68081723%3A_____%2F12%3A00385457" target="_blank" >RIV/68081723:_____/12:00385457 - isvavai.cz</a>

Výsledek na webu

<a href="http://dx.doi.org/10.1016/j.jeurceramsoc.2011.09.004" target="_blank" >http://dx.doi.org/10.1016/j.jeurceramsoc.2011.09.004</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.1016/j.jeurceramsoc.2011.09.004" target="_blank" >10.1016/j.jeurceramsoc.2011.09.004</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Laminated alumina/zirconia ceramic composites prepared by electrophoretic

Popis výsledku v původním jazyce

The electrophoretic deposition of alumina and zirconia powders from isopropanolic suspension in the presence of monochloracetic acid was studied in the constant-current regime. The different levels of electric current during deposition from 250 ?A to 48mA were used. The green density of the deposit depends on the current density and then on the particle velocity during deposition, reaching values from 58% to 61% according to the electric current used. It was found that the lower the green density of the green deposit, the larger the pores. The low green density led to low final fired density and subsequently to the low Vickers hardness HV5 ranging from 2000 to 1650 depending on electric current used. Based on these findings microlaminates having various thickness ratios to achieve different residual stress levels were prepared consisting of alternating layers of alumina and zirconia.

Název v anglickém jazyce

Laminated alumina/zirconia ceramic composites prepared by electrophoretic

Popis výsledku anglicky

The electrophoretic deposition of alumina and zirconia powders from isopropanolic suspension in the presence of monochloracetic acid was studied in the constant-current regime. The different levels of electric current during deposition from 250 ?A to 48mA were used. The green density of the deposit depends on the current density and then on the particle velocity during deposition, reaching values from 58% to 61% according to the electric current used. It was found that the lower the green density of the green deposit, the larger the pores. The low green density led to low final fired density and subsequently to the low Vickers hardness HV5 ranging from 2000 to 1650 depending on electric current used. Based on these findings microlaminates having various thickness ratios to achieve different residual stress levels were prepared consisting of alternating layers of alumina and zirconia.

Druh

J_x - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)

CEP obor

JH - Keramika, žáruvzdorné materiály a skla

OECD FORD obor

—

Projekt

<a href="/cs/project/GAP108%2F11%2F1644" target="_blank" >GAP108/11/1644: Lomově mechanické charakteristiky rozhraní materiálů s nízkou houževnatostí</a><br>

Návaznosti

Z - Vyzkumny zamer (s odkazem do CEZ)<br>I - Institucionalni podpora na dlouhodoby koncepcni rozvoj vyzkumne organizace

Rok uplatnění

2012

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Journal of the European Ceramic Society

ISSN

0955-2219

e-ISSN

—

Svazek periodika

32

Číslo periodika v rámci svazku

9

Stát vydavatele periodika

GB - Spojené království Velké Británie a Severního Irska

Počet stran výsledku

4

Strana od-do

2053-2056

Kód UT WoS článku

000303626200028

EID výsledku v databázi Scopus

—