Fracture Resistance of 14Cr ODS Steel Exposed to a High Temperature Gas

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F68081723%3A_____%2F17%3A00506817" target="_blank" >RIV/68081723:_____/17:00506817 - isvavai.cz</a>

Nalezeny alternativní kódy

RIV/26722445:_____/17:N0000063 RIV/00216305:26620/17:PU127352

Výsledek na webu

<a href="https://www.mdpi.com/2075-4701/7/12/560/htm" target="_blank" >https://www.mdpi.com/2075-4701/7/12/560/htm</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.3390/met7120560" target="_blank" >10.3390/met7120560</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Fracture Resistance of 14Cr ODS Steel Exposed to a High Temperature Gas

Popis výsledku v původním jazyce

This paper studies the impact fracture behavior of the 14%Cr Oxide Dispersion Strengthened (ODS) steel (ODM401) after high temperature exposures in helium and air in comparison to the as-received state. A steel bar was produced by mechanical alloying and hot-extrusion at 1150 degrees C. Further, it was cut into small specimens, which were consequently exposed to air or 99.9% helium in a furnace at 720 degrees C for 500 h. Impact energy transition curves are shifted towards higher temperatures after the gas exposures. The transition temperatures of the exposed states significantly increase in comparison to the as-received steel by about 40 degrees C in He and 60 degrees C in the air. Differences are discussed in terms of microstructure, surface and subsurface Scanning Electron Microscope (SEM) and Transmission Electron Microscope (TEM) observations. The embrittlement was explained as temperature and environmental effects resulting in a decrease of dislocation level, slight change of the particle composition and interface/grain boundary segregations, which consequently affected the nucleation of voids leading to the ductile fracture.

Název v anglickém jazyce

Fracture Resistance of 14Cr ODS Steel Exposed to a High Temperature Gas

Popis výsledku anglicky

This paper studies the impact fracture behavior of the 14%Cr Oxide Dispersion Strengthened (ODS) steel (ODM401) after high temperature exposures in helium and air in comparison to the as-received state. A steel bar was produced by mechanical alloying and hot-extrusion at 1150 degrees C. Further, it was cut into small specimens, which were consequently exposed to air or 99.9% helium in a furnace at 720 degrees C for 500 h. Impact energy transition curves are shifted towards higher temperatures after the gas exposures. The transition temperatures of the exposed states significantly increase in comparison to the as-received steel by about 40 degrees C in He and 60 degrees C in the air. Differences are discussed in terms of microstructure, surface and subsurface Scanning Electron Microscope (SEM) and Transmission Electron Microscope (TEM) observations. The embrittlement was explained as temperature and environmental effects resulting in a decrease of dislocation level, slight change of the particle composition and interface/grain boundary segregations, which consequently affected the nucleation of voids leading to the ductile fracture.

Druh

J_imp - Článek v periodiku v databázi Web of Science

CEP obor

—

OECD FORD obor

20501 - Materials engineering

Projekt

<a href="/cs/project/LQ1601" target="_blank" >LQ1601: CEITEC 2020</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2017

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Metals

ISSN

2075-4701

e-ISSN

—

Svazek periodika

7

Číslo periodika v rámci svazku

12

Stát vydavatele periodika

CH - Švýcarská konfederace

Počet stran výsledku

17

Strana od-do

560

Kód UT WoS článku

000419184500045

EID výsledku v databázi Scopus

2-s2.0-85038128447