Creating of 3D map of temperature fields OKR at depths of around 1000 m

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F68145535%3A_____%2F14%3A00430270" target="_blank" >RIV/68145535:_____/14:00430270 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Creating of 3D map of temperature fields OKR at depths of around 1000 m

Popis výsledku v původním jazyce

Relatively accurate perception of the temperature distribution in the rock mass can be obtained from measurements realized in boreholess drilled directly in mine workings. Due to the character of these measurements it is possible to greatly reduce or completely eliminate the adverse effects of measurements, limiting the correct use of other methods. Surveying of the temperature field of the rock mass at high depths in the years 2011-2013 was performed on the basis of the temperature field measurement found on the Polish method defined in the standard PN-G-04038. This methodology has been successfully applied in the conditions of the Upper Silesian coal basin of Polish part. For measurements, measuring equipment consisting of a temperature sensor is inserted at the bottom of the borehole and measuring device connected to the sensor with an electrical cable. For reliable capture of the temperature by this method, a freshly exposed rock massif should be drilled at a depth of aprox. 2 m. T

Název v anglickém jazyce

Creating of 3D map of temperature fields OKR at depths of around 1000 m

Popis výsledku anglicky

Relatively accurate perception of the temperature distribution in the rock mass can be obtained from measurements realized in boreholess drilled directly in mine workings. Due to the character of these measurements it is possible to greatly reduce or completely eliminate the adverse effects of measurements, limiting the correct use of other methods. Surveying of the temperature field of the rock mass at high depths in the years 2011-2013 was performed on the basis of the temperature field measurement found on the Polish method defined in the standard PN-G-04038. This methodology has been successfully applied in the conditions of the Upper Silesian coal basin of Polish part. For measurements, measuring equipment consisting of a temperature sensor is inserted at the bottom of the borehole and measuring device connected to the sensor with an electrical cable. For reliable capture of the temperature by this method, a freshly exposed rock massif should be drilled at a depth of aprox. 2 m. T

Druh

O - Ostatní výsledky

CEP obor

DH - Báňský průmysl včetně těžby a zpracování uhlí

OECD FORD obor

—

Projekt

—

Návaznosti

I - Institucionalni podpora na dlouhodoby koncepcni rozvoj vyzkumne organizace

Rok uplatnění

2014

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů