Konstrukční úpravy dataprojektoru pro optická 3D měření

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F68378271%3A_____%2F08%3A00313105" target="_blank" >RIV/68378271:_____/08:00313105 - isvavai.cz</a>

Nalezeny alternativní kódy

RIV/61989592:15310/08:00007673

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Construction modification of data-projector for optical 3D measurement

Popis výsledku v původním jazyce

Optical profilometric and topographic non-coherence measurements have a great use today, for example in deformation measurement, product quality control, total arthroplasty wear measurement and many others. These measurements are based on using optical structure, which is projected on the measured object and is deformed by its surface. Good projector of such optical structure is data-projector. Its imperfection is too large zoom of serial objective, so measurement of small objects is influenced by quitebig measurement error. This is caused by projecting only small part of optical structure is projected on measured object and that negative influences resolution of measurement method. For the measurement of small objects is necessary replace the serialobjective by objective, whom parameters allow the measurement of this object influenced by the measurement error as small as possible.

Název v anglickém jazyce

Construction modification of data-projector for optical 3D measurement

Popis výsledku anglicky

Optical profilometric and topographic non-coherence measurements have a great use today, for example in deformation measurement, product quality control, total arthroplasty wear measurement and many others. These measurements are based on using optical structure, which is projected on the measured object and is deformed by its surface. Good projector of such optical structure is data-projector. Its imperfection is too large zoom of serial objective, so measurement of small objects is influenced by quitebig measurement error. This is caused by projecting only small part of optical structure is projected on measured object and that negative influences resolution of measurement method. For the measurement of small objects is necessary replace the serialobjective by objective, whom parameters allow the measurement of this object influenced by the measurement error as small as possible.

Druh

D - Stať ve sborníku

CEP obor

BH - Optika, masery a lasery

OECD FORD obor

—

Projekt

<a href="/cs/project/1M06002" target="_blank" >1M06002: Optické struktury, detekční systémy a související technologie pro nízkofotonové aplikace</a><br>

Návaznosti

Z - Vyzkumny zamer (s odkazem do CEZ)

Rok uplatnění

2008

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

Proceedings of the 46th International Scientific Conference Experimental Stress Analysis

ISBN

978-80-248-1774-3

ISSN

—

e-ISSN

—

Počet stran výsledku

4

Strana od-do

—

Název nakladatele

VŠB - TU

Místo vydání

Ostrava

Místo konání akce

Horní Bečva

Datum konání akce

2. 6. 2008

Typ akce podle státní příslušnosti

EUR - Evropská akce

Kód UT WoS článku

—