Black aluminum-coated Pt/Pb(Zr0.56Ti0.44)03/Pt thin film structures for pyroelectric energy harvesting from a light source

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F68378271%3A_____%2F19%3A00518875" target="_blank" >RIV/68378271:_____/19:00518875 - isvavai.cz</a>

Výsledek na webu

<a href="https://doi.org/10.1063/1.5130538" target="_blank" >https://doi.org/10.1063/1.5130538</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.1063/1.5130538" target="_blank" >10.1063/1.5130538</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Black aluminum-coated Pt/Pb(Zr0.56Ti0.44)03/Pt thin film structures for pyroelectric energy harvesting from a light source

Popis výsledku v původním jazyce

A black aluminum (B-Al) film was deposited onto the surface of a stack structure of platinum/Pb(ZrxTi1 − x)O3/platinum (Pt/PZT/Pt) to convert light into a heat variation and the heat variation into a polarization change. A comparison was performed between B-Al/Pt/PZT/Pt and conventional Pt/PZT/Pt structures. An absorbance higher than 95% was measured for the B-Al layer over a large range of wavelengths varying from 350 nm to 1000 nm. The theoretical model shows that heat diffusion was extremely fast through the layers, and the sample holder played a key role in the variation and stabilization of the system temperature. A doubled variation of the polarization was observed when the light was applied onto the surface of the stack structure with stable B-Al on the top. This behavior was interpreted by the larger temperature variations induced under the highly absorptive B-Al layers, in good correlation with the theoretical model prediction based on the heat fluxes in the structures.

Název v anglickém jazyce

Black aluminum-coated Pt/Pb(Zr0.56Ti0.44)03/Pt thin film structures for pyroelectric energy harvesting from a light source

Popis výsledku anglicky

A black aluminum (B-Al) film was deposited onto the surface of a stack structure of platinum/Pb(ZrxTi1 − x)O3/platinum (Pt/PZT/Pt) to convert light into a heat variation and the heat variation into a polarization change. A comparison was performed between B-Al/Pt/PZT/Pt and conventional Pt/PZT/Pt structures. An absorbance higher than 95% was measured for the B-Al layer over a large range of wavelengths varying from 350 nm to 1000 nm. The theoretical model shows that heat diffusion was extremely fast through the layers, and the sample holder played a key role in the variation and stabilization of the system temperature. A doubled variation of the polarization was observed when the light was applied onto the surface of the stack structure with stable B-Al on the top. This behavior was interpreted by the larger temperature variations induced under the highly absorptive B-Al layers, in good correlation with the theoretical model prediction based on the heat fluxes in the structures.

Druh

J_imp - Článek v periodiku v databázi Web of Science

CEP obor

—

OECD FORD obor

10302 - Condensed matter physics (including formerly solid state physics, supercond.)

Projekt

Výsledek vznikl pri realizaci vícero projektů. Více informací v záložce Projekty.

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2019

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Journal of Applied Physics

ISSN

0021-8979

e-ISSN

—

Svazek periodika

126

Číslo periodika v rámci svazku

21

Stát vydavatele periodika

US - Spojené státy americké

Počet stran výsledku

7

Strana od-do

1-7

Kód UT WoS článku

000504007300018

EID výsledku v databázi Scopus

2-s2.0-85075929056