Fiber reinforced concrete: Residual flexure strength enhancement using surface modified fibers

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F68378271%3A_____%2F21%3A00561149" target="_blank" >RIV/68378271:_____/21:00561149 - isvavai.cz</a>

Nalezeny alternativní kódy

RIV/68407700:21110/21:00350405

Výsledek na webu

<a href="https://doi.org/10.1063/5.0042044" target="_blank" >https://doi.org/10.1063/5.0042044</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.1063/5.0042044" target="_blank" >10.1063/5.0042044</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Fiber reinforced concrete: Residual flexure strength enhancement using surface modified fibers

Popis výsledku v původním jazyce

Fiber reinforced concrete often fails due to poor adhesion between polymer fibers and the cement matrix which is caused by fiber flat and chemically inert surfaces. Such a phenomenon can be overcome by modifying the fibers with plasma treatment which activate and roughen their surfaces. Polypropylene-polyethylene and polypropylene macro-fibers were exposed to low-pressure cold dioxygen plasma treatment for 30 seconds. In order to quantify how plasma treated fibers can affect mechanical response of fiber reinforced concrete, notched specimens containing 0.75 vol. % of reinforcement were made and subjected to three-point bending test. It was shown that specimens with modified fibers exhibited up to 40 % improvement in residual flexural tensile strength than those containing reference reinforcement.

Název v anglickém jazyce

Fiber reinforced concrete: Residual flexure strength enhancement using surface modified fibers

Popis výsledku anglicky

Fiber reinforced concrete often fails due to poor adhesion between polymer fibers and the cement matrix which is caused by fiber flat and chemically inert surfaces. Such a phenomenon can be overcome by modifying the fibers with plasma treatment which activate and roughen their surfaces. Polypropylene-polyethylene and polypropylene macro-fibers were exposed to low-pressure cold dioxygen plasma treatment for 30 seconds. In order to quantify how plasma treated fibers can affect mechanical response of fiber reinforced concrete, notched specimens containing 0.75 vol. % of reinforcement were made and subjected to three-point bending test. It was shown that specimens with modified fibers exhibited up to 40 % improvement in residual flexural tensile strength than those containing reference reinforcement.

Druh

D - Stať ve sborníku

CEP obor

—

OECD FORD obor

20101 - Civil engineering

Projekt

—

Návaznosti

I - Institucionalni podpora na dlouhodoby koncepcni rozvoj vyzkumne organizace

Rok uplatnění

2021

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

AIP Conference Proceedings

ISBN

978-0-7354-4066-1

ISSN

—

e-ISSN

—

Počet stran výsledku

5

Strana od-do

020030

Název nakladatele

AIP Publishing

Místo vydání

Melville

Místo konání akce

Skalský Dvůr

Datum konání akce

14. 10. 2020

Typ akce podle státní příslušnosti

EUR - Evropská akce

Kód UT WoS článku

000653725400026