Iron alloys outdoor corrosion and laboratory simulation - comparison

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F68378297%3A_____%2F17%3A00486679" target="_blank" >RIV/68378297:_____/17:00486679 - isvavai.cz</a>

Nalezeny alternativní kódy

RIV/25794787:_____/17:N0000008 RIV/00216224:14310/17:00102306

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Iron alloys outdoor corrosion and laboratory simulation - comparison

Popis výsledku v původním jazyce

Simulation of iron alloy corrosion is widespread used to predict corrosion resistance. The simulation using corrosion chambers or climatic chambers provides reasonable information on corrosion resistance, the corrosion rate however must be compared to real exposition as the corrosion in simulated environment is accelerated compared to real situation. However the composition of corrosion products and its structure is different question. The corrosion products composition is dependent on corrosion process. The phases present are most likely the same, most voluminous hydrated oxides and oxy-hydroxides on the outside where the less voluminous oxides are present in the lower layers. However this macroscopic phase structure may not fully describe the layered structure of corrosion products, thickness of corrosion products or mechanical properties. In the vicinity of crack in corrosion products the structure is more likely to be similar to the structure near the surface.

Název v anglickém jazyce

Iron alloys outdoor corrosion and laboratory simulation - comparison

Popis výsledku anglicky

Simulation of iron alloy corrosion is widespread used to predict corrosion resistance. The simulation using corrosion chambers or climatic chambers provides reasonable information on corrosion resistance, the corrosion rate however must be compared to real exposition as the corrosion in simulated environment is accelerated compared to real situation. However the composition of corrosion products and its structure is different question. The corrosion products composition is dependent on corrosion process. The phases present are most likely the same, most voluminous hydrated oxides and oxy-hydroxides on the outside where the less voluminous oxides are present in the lower layers. However this macroscopic phase structure may not fully describe the layered structure of corrosion products, thickness of corrosion products or mechanical properties. In the vicinity of crack in corrosion products the structure is more likely to be similar to the structure near the surface.

Druh

D - Stať ve sborníku

CEP obor

—

OECD FORD obor

20506 - Coating and films

Projekt

<a href="/cs/project/LO1219" target="_blank" >LO1219: Udržitelný pokročilý rozvoj CET</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2017

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

METAL 2017. 26th International Conference on Metallurgy and Materials. Conference Proceedings

ISBN

978-80-87294-79-6

ISSN

—

e-ISSN

—

Počet stran výsledku

6

Strana od-do

912-917

Název nakladatele

TANGER

Místo vydání

Ostrava

Místo konání akce

Brno

Datum konání akce

24. 5. 2017

Typ akce podle státní příslušnosti

WRD - Celosvětová akce

Kód UT WoS článku

—