ToraDjust Controller - Software tool for controlling micrometric platform
Identifikátory výsledku
Kód výsledku v IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F68378297%3A_____%2F23%3A00568867" target="_blank" >RIV/68378297:_____/23:00568867 - isvavai.cz</a>
Výsledek na webu
<a href="https://www.itam.cas.cz/Software/ToraDjust-Controller/index.html" target="_blank" >https://www.itam.cas.cz/Software/ToraDjust-Controller/index.html</a>
DOI - Digital Object Identifier
—
Alternativní jazyky
Jazyk výsledku
angličtina
Název v původním jazyce
ToraDjust Controller - Software tool for controlling micrometric platform
Popis výsledku v původním jazyce
During the X-ray computed tomography, the object is placed on a precise rotational platform. If a high resolution of the resultant model is required, the sample must be small enough and it must be placed close to the radiation source (in units of mm). For the adjustment of the sample position, precise stages with micrometric xy positioning are used. Manual adjustment of the micrometric displacements when preparing the tomographic scanning is an uncomfortable and time-confuming task. It is much more convenient when the movement of the micrometric axes is motorized. A simple instrumentation was developed and realized with the most of pieces fabricated in a 3D printer, allowing to connect two small step motors to a micrometric stage and control them from a PC using a USB connection. The two motors are controlled by a microcontroller, which supports a command set based on characters sent via the USB. ToraDjust Controller is an application with a dedicated GUI for controlling the positioner. The software was developed and tested in Python 3.8 and requires PyQt5 package.
Název v anglickém jazyce
ToraDjust Controller - Software tool for controlling micrometric platform
Popis výsledku anglicky
During the X-ray computed tomography, the object is placed on a precise rotational platform. If a high resolution of the resultant model is required, the sample must be small enough and it must be placed close to the radiation source (in units of mm). For the adjustment of the sample position, precise stages with micrometric xy positioning are used. Manual adjustment of the micrometric displacements when preparing the tomographic scanning is an uncomfortable and time-confuming task. It is much more convenient when the movement of the micrometric axes is motorized. A simple instrumentation was developed and realized with the most of pieces fabricated in a 3D printer, allowing to connect two small step motors to a micrometric stage and control them from a PC using a USB connection. The two motors are controlled by a microcontroller, which supports a command set based on characters sent via the USB. ToraDjust Controller is an application with a dedicated GUI for controlling the positioner. The software was developed and tested in Python 3.8 and requires PyQt5 package.
Klasifikace
Druh
R - Software
CEP obor
—
OECD FORD obor
20201 - Electrical and electronic engineering
Návaznosti výsledku
Projekt
—
Návaznosti
I - Institucionalni podpora na dlouhodoby koncepcni rozvoj vyzkumne organizace
Ostatní
Rok uplatnění
2023
Kód důvěrnosti údajů
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů
Údaje specifické pro druh výsledku
Interní identifikační kód produktu
ToraDjust_SW
Technické parametry
Licenci poskytne: Michal Vopálenský, vopalensky@itam.cas.cz, tel: 567 225 343
Ekonomické parametry
nástroj pro ovládání dvouosého motorizovaného stolku
IČO vlastníka výsledku
68378297
Název vlastníka
Ústav teoretické a aplikované mechaniky AV ČR, v. v. i.