Behaviour of Glued Connections under Shear Loading

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F68407700%3A21110%2F15%3A00230632" target="_blank" >RIV/68407700:21110/15:00230632 - isvavai.cz</a>

Nalezeny alternativní kódy

RIV/68407700:21720/15:00230632

Výsledek na webu

<a href="http://dx.doi.org/10.4028/www.scientific.net/KEM.662.241" target="_blank" >http://dx.doi.org/10.4028/www.scientific.net/KEM.662.241</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.4028/www.scientific.net/KEM.662.241" target="_blank" >10.4028/www.scientific.net/KEM.662.241</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Behaviour of Glued Connections under Shear Loading

Popis výsledku v původním jazyce

An intensive research in load-bearing glass structures leads to the requirement for performing glass-to-glass or glass-to-different material connections. Glued shear connection is suitable for these applications mainly due to its uniform stress distribution in larger area in comparison with bolted connections. The reliability of adhesive in the connection during the life time of a structure is affected by many factors, 1, 2, 3, 4. The article deals with the experimental analysis focused on the determination of material characteristics of adhesives in planar connections, it describes the effect of various factors on the behavior of an adhesive joint under increasing shear loads, its ultimate load-bearing capacity and its failure modes. The main investigated factors are the type of adhesive, the type of connected materials (material of substrate), surface treatment and the thickness of the adhesive layer. Due to importance of adhesive layer thickness especially in rigid and semi-rigid gl

Název v anglickém jazyce

Behaviour of Glued Connections under Shear Loading

Popis výsledku anglicky

An intensive research in load-bearing glass structures leads to the requirement for performing glass-to-glass or glass-to-different material connections. Glued shear connection is suitable for these applications mainly due to its uniform stress distribution in larger area in comparison with bolted connections. The reliability of adhesive in the connection during the life time of a structure is affected by many factors, 1, 2, 3, 4. The article deals with the experimental analysis focused on the determination of material characteristics of adhesives in planar connections, it describes the effect of various factors on the behavior of an adhesive joint under increasing shear loads, its ultimate load-bearing capacity and its failure modes. The main investigated factors are the type of adhesive, the type of connected materials (material of substrate), surface treatment and the thickness of the adhesive layer. Due to importance of adhesive layer thickness especially in rigid and semi-rigid gl

Druh

D - Stať ve sborníku

CEP obor

JM - Inženýrské stavitelství

OECD FORD obor

—

Projekt

Výsledek vznikl pri realizaci vícero projektů. Více informací v záložce Projekty.

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2015

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

Proceedings of the 11th Conference on Local Mechanical Properties

ISBN

978-3-03835-555-7

ISSN

1013-9826

e-ISSN

—

Počet stran výsledku

4

Strana od-do

241-244

Název nakladatele

Trans Tech Publications

Místo vydání

Uetikon-Zurich

Místo konání akce

Stará Lesná

Datum konání akce

12. 11. 2014

Typ akce podle státní příslušnosti

WRD - Celosvětová akce

Kód UT WoS článku

—