Construction of an experimental pressure and sealing plug for a radioactive waste repository as a part of the DOPAS project

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F68407700%3A21110%2F15%3A00240919" target="_blank" >RIV/68407700:21110/15:00240919 - isvavai.cz</a>

Výsledek na webu

<a href="http://dx.doi.org/10.5593/SGEM2015/B12/S2.028" target="_blank" >http://dx.doi.org/10.5593/SGEM2015/B12/S2.028</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.5593/SGEM2015/B12/S2.028" target="_blank" >10.5593/SGEM2015/B12/S2.028</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Construction of an experimental pressure and sealing plug for a radioactive waste repository as a part of the DOPAS project

Popis výsledku v původním jazyce

The international DOPAS project (Demonstration of Plugs and Seals), which involves the participation of 14 European organisations (Posiva, ANDRA, DBE-TEC, GRS, Nagra, NDA, SÚRAO, SKB, ČVUT, NRG, GSL, BTECH, VTT, ÚJV Řež, a. s.), is concerned with the structural solution for sealing plugs to be used in deep geological radioactive waste repositories. The project is funded by the 7th framework programme ? EURATOM. Contribution of the Czech Republic to the DOPAS project (the EPSP experiment ? Experimental Pressure and Sealing Plug) consists of a full scale demonstration experiment which is being conducted at the Josef Regional Underground Research Centre (URC Josef). The aims of the EPSP experiment are to develop, monitor and verify the functionality of such plugs and to determine a detailed characterisation of the materials from which the plug is constructed. The design basis of the plug was based on a structural proposal contained in Reference Design 2011. Detail technical design was the

Název v anglickém jazyce

Construction of an experimental pressure and sealing plug for a radioactive waste repository as a part of the DOPAS project

Popis výsledku anglicky

The international DOPAS project (Demonstration of Plugs and Seals), which involves the participation of 14 European organisations (Posiva, ANDRA, DBE-TEC, GRS, Nagra, NDA, SÚRAO, SKB, ČVUT, NRG, GSL, BTECH, VTT, ÚJV Řež, a. s.), is concerned with the structural solution for sealing plugs to be used in deep geological radioactive waste repositories. The project is funded by the 7th framework programme ? EURATOM. Contribution of the Czech Republic to the DOPAS project (the EPSP experiment ? Experimental Pressure and Sealing Plug) consists of a full scale demonstration experiment which is being conducted at the Josef Regional Underground Research Centre (URC Josef). The aims of the EPSP experiment are to develop, monitor and verify the functionality of such plugs and to determine a detailed characterisation of the materials from which the plug is constructed. The design basis of the plug was based on a structural proposal contained in Reference Design 2011. Detail technical design was the

Druh

D - Stať ve sborníku

CEP obor

JN - Stavebnictví

OECD FORD obor

—

Projekt

<a href="/cs/project/7G13002" target="_blank" >7G13002: Full Scale Demonstration of Plugs and Seals</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2015

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

15th INTERNATIONAL MULTIDISCIPLINARY SCIENTIFIC GEOCONFERENCE SGEM 2015

ISBN

978-619-7105-32-2

ISSN

1314-2704

e-ISSN

—

Počet stran výsledku

8

Strana od-do

209-216

Název nakladatele

Academy of Sciences

Místo vydání

Varna

Místo konání akce

Albena

Datum konání akce

18. 6. 2015

Typ akce podle státní příslušnosti

WRD - Celosvětová akce

Kód UT WoS článku

000371662800028