Cement Composite Reinforced with Synthetic Fibers: Comparison of Three-point and Four-point Bending Test Results

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F68407700%3A21110%2F16%3A00239484" target="_blank" >RIV/68407700:21110/16:00239484 - isvavai.cz</a>

Výsledek na webu

<a href="http://dx.doi.org/10.4028/www.scientific.net/AMM.827.332" target="_blank" >http://dx.doi.org/10.4028/www.scientific.net/AMM.827.332</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.4028/www.scientific.net/AMM.827.332" target="_blank" >10.4028/www.scientific.net/AMM.827.332</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Cement Composite Reinforced with Synthetic Fibers: Comparison of Three-point and Four-point Bending Test Results

Popis výsledku v původním jazyce

Presented article deals with the influence of PET fiber production on the bending strength of cement-based composite when incorporated into the fresh mortar, and comparison of results of 3-point and 4-point bending test. Cement paste samples were reinforced with 2 wt. % of primary or recycled PET fibers. The bending test was performed on prismatic samples with dimension of 40 x 40 x 160 mm. It was found that samples with recycled PET fibers, compared to primary ones, exhibit a decrease in bending strength. In the case of 4-point bending tests, the samples with recycled PET fibers exhibited higher bending strength than reference samples without any fibers. However, in the case of 3-point bending tests, the samples with recycled PET fibers had lower bending strength than the reference ones. The results suggest that recycled PET fibers could be used as an alternative to reinforce cement-based composites.

Název v anglickém jazyce

Cement Composite Reinforced with Synthetic Fibers: Comparison of Three-point and Four-point Bending Test Results

Popis výsledku anglicky

Presented article deals with the influence of PET fiber production on the bending strength of cement-based composite when incorporated into the fresh mortar, and comparison of results of 3-point and 4-point bending test. Cement paste samples were reinforced with 2 wt. % of primary or recycled PET fibers. The bending test was performed on prismatic samples with dimension of 40 x 40 x 160 mm. It was found that samples with recycled PET fibers, compared to primary ones, exhibit a decrease in bending strength. In the case of 4-point bending tests, the samples with recycled PET fibers exhibited higher bending strength than reference samples without any fibers. However, in the case of 3-point bending tests, the samples with recycled PET fibers had lower bending strength than the reference ones. The results suggest that recycled PET fibers could be used as an alternative to reinforce cement-based composites.

Druh

D - Stať ve sborníku

CEP obor

JN - Stavebnictví

OECD FORD obor

—

Projekt

—

Návaznosti

S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2016

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

Applied Methods of the Analysis of Static and Dynamic Loads of Structures and Machines II

ISBN

978-3-03835-531-1

ISSN

1660-9336

e-ISSN

—

Počet stran výsledku

4

Strana od-do

332-335

Název nakladatele

TRANS TECH PUBLICATIONS LTD

Místo vydání

Zurich

Místo konání akce

Český Krumlov

Datum konání akce

1. 6. 2015

Typ akce podle státní příslušnosti

WRD - Celosvětová akce

Kód UT WoS článku

—