Thermal Properties of Cement Based Composites with Municipal Solid Waste Incinerator Fly Ash Accessed by Two Different Transient Methods

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F68407700%3A21110%2F16%3A00242666" target="_blank" >RIV/68407700:21110/16:00242666 - isvavai.cz</a>

Výsledek na webu

<a href="http://dx.doi.org/10.5755/j01.ms.22.1.7203" target="_blank" >http://dx.doi.org/10.5755/j01.ms.22.1.7203</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.5755/j01.ms.22.1.7203" target="_blank" >10.5755/j01.ms.22.1.7203</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Thermal Properties of Cement Based Composites with Municipal Solid Waste Incinerator Fly Ash Accessed by Two Different Transient Methods

Popis výsledku v původním jazyce

Thermal properties of cement composite with Mixed Fly Ash (MFA) from different parts of Municipal Solid Waste Incineration (MSWI) process as a partial replacement of Portland cement are researched in the paper. MFA is applied in the amount of 10 %, 20 % and 30 % of the mass of cement, while sand and water quantities are kept constant. For the sake of comparison, a reference mixture with Portland cement as the only binder is studied as well. For the characterization of studied materials, their basic physical properties as bulk density, matrix density and total open porosity are measured using gravimetric method combined with helium pycnometry. Among the thermal properties, thermal conductivity, thermal diffusivity and specific heat capacity are accessed by two transient methods having different experimental arrangement and time of measurement. The measured data obtained by the particular methods are compared and the applicability of the methods for the measurement of thermal properties of solid building materials is discussed.

Název v anglickém jazyce

Thermal Properties of Cement Based Composites with Municipal Solid Waste Incinerator Fly Ash Accessed by Two Different Transient Methods

Popis výsledku anglicky

Thermal properties of cement composite with Mixed Fly Ash (MFA) from different parts of Municipal Solid Waste Incineration (MSWI) process as a partial replacement of Portland cement are researched in the paper. MFA is applied in the amount of 10 %, 20 % and 30 % of the mass of cement, while sand and water quantities are kept constant. For the sake of comparison, a reference mixture with Portland cement as the only binder is studied as well. For the characterization of studied materials, their basic physical properties as bulk density, matrix density and total open porosity are measured using gravimetric method combined with helium pycnometry. Among the thermal properties, thermal conductivity, thermal diffusivity and specific heat capacity are accessed by two transient methods having different experimental arrangement and time of measurement. The measured data obtained by the particular methods are compared and the applicability of the methods for the measurement of thermal properties of solid building materials is discussed.

Druh

J_x - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)

CEP obor

JI - Kompositní materiály

OECD FORD obor

—

Projekt

<a href="/cs/project/GA14-22909S" target="_blank" >GA14-22909S: Výzkum využití materiálů s fázovou změnou v tepelně akumulačních omítkách</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2016

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Materials Science

ISSN

1392-1320

e-ISSN

—

Svazek periodika

22

Číslo periodika v rámci svazku

1

Stát vydavatele periodika

LT - Litevská republika

Počet stran výsledku

6

Strana od-do

132-137

Kód UT WoS článku

000371799400025

EID výsledku v databázi Scopus

2-s2.0-84958769431