Residual properties of fiber-reinforced refractory composites with a fireclay filler

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F68407700%3A21110%2F16%3A00243294" target="_blank" >RIV/68407700:21110/16:00243294 - isvavai.cz</a>

Výsledek na webu

<a href="https://doi.org/10.14311/APP.2016.56.0027" target="_blank" >https://doi.org/10.14311/APP.2016.56.0027</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.14311/APP.2016.56.0027" target="_blank" >10.14311/APP.2016.56.0027</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Residual properties of fiber-reinforced refractory composites with a fireclay filler

Popis výsledku v původním jazyce

The aim of our study was to develop a composite material for industrial use that is resistant to the effect of high temperatures. The binder system based on aluminous cement was modified by adding finely-ground ceramic powder and metakaolin to reduce costs and also to reduce adverse effects on the environment due to high energy consumption for cement production. Additives were applied as a partial aluminous cement replacement in doses of 10, 20 and 30% by weight. The composites were evaluated on the basis of their mechanical properties and their bulk density after gradual temperature loading. The influence of basalt fibers and modifications to the binder system were studied at the same time. Basalt fibers were applied in doses of 0.5% and 2.0% by volume. The results confirmed the potential of the mineral additives studied here for practical applications, taking into account the residual mechanical parameters after thermal loading. The addition of ceramic powder reduced the bulk density by 5% for each 10% of cement substitution, but the residual values were very similar. The bulk density and the compressive strength were reduced when basalt fibers were applied, and the flexural strength was significantly increased in proportion to the fiber dosages. Metakaolin seems to be a more suitable additive than the ceramic powder that was applied here, because there was a significant increase in the mechanical parameters and also in the residual values of all properties that were studied.

Název v anglickém jazyce

Residual properties of fiber-reinforced refractory composites with a fireclay filler

Popis výsledku anglicky

The aim of our study was to develop a composite material for industrial use that is resistant to the effect of high temperatures. The binder system based on aluminous cement was modified by adding finely-ground ceramic powder and metakaolin to reduce costs and also to reduce adverse effects on the environment due to high energy consumption for cement production. Additives were applied as a partial aluminous cement replacement in doses of 10, 20 and 30% by weight. The composites were evaluated on the basis of their mechanical properties and their bulk density after gradual temperature loading. The influence of basalt fibers and modifications to the binder system were studied at the same time. Basalt fibers were applied in doses of 0.5% and 2.0% by volume. The results confirmed the potential of the mineral additives studied here for practical applications, taking into account the residual mechanical parameters after thermal loading. The addition of ceramic powder reduced the bulk density by 5% for each 10% of cement substitution, but the residual values were very similar. The bulk density and the compressive strength were reduced when basalt fibers were applied, and the flexural strength was significantly increased in proportion to the fiber dosages. Metakaolin seems to be a more suitable additive than the ceramic powder that was applied here, because there was a significant increase in the mechanical parameters and also in the residual values of all properties that were studied.

Druh

J_SC - Článek v periodiku v databázi SCOPUS

CEP obor

—

OECD FORD obor

20101 - Civil engineering

Projekt

<a href="/cs/project/GAP104%2F12%2F0791" target="_blank" >GAP104/12/0791: Vláknové kompozity na bázi cementu pro vysokoteplotní aplikace</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2016

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Acta Polytechnica

ISSN

1210-2709

e-ISSN

1805-2363

Svazek periodika

56

Číslo periodika v rámci svazku

1

Stát vydavatele periodika

CZ - Česká republika

Počet stran výsledku

6

Strana od-do

27-32

Kód UT WoS článku

000411572200004

EID výsledku v databázi Scopus

2-s2.0-84959285753