Heat transport and storage processes in differential scanning calorimeter: Computational analysis and model validation

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F68407700%3A21110%2F19%3A00330082" target="_blank" >RIV/68407700:21110/19:00330082 - isvavai.cz</a>

Výsledek na webu

<a href="https://doi.org/10.1016/j.ijheatmasstransfer.2019.03.015" target="_blank" >https://doi.org/10.1016/j.ijheatmasstransfer.2019.03.015</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.1016/j.ijheatmasstransfer.2019.03.015" target="_blank" >10.1016/j.ijheatmasstransfer.2019.03.015</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Heat transport and storage processes in differential scanning calorimeter: Computational analysis and model validation

Popis výsledku v původním jazyce

Experimental results provided by differential scanning calorimetry (DSC) can be affected by systematic errors, which are difficult to identify and quantify correctly by the end-users, as a DSC device is commonly used as a gray box. The signal delay due to thermal inertia and the effects of sample size or heating rate present the most common sources of uncertainties. In this paper, a 3-D computational model of a differential scanning calorimeter is constructed, calibrated and validated. Five reference standards are used for both experimental and computational calibration, resulting in a very good agreement (R2 > 0.999794) of the computational model with experimental outputs. Model is validated using two different materials and processes. The analysis of melting of aluminum, as one of the standards not used at the calibration, shows a maximum difference of 0.279 mW.mg-1 at the peak top, which is well within the accuracy limits. The application of the model for the determination of effective specific heat capacity of quartz, as a representative of commonly studied materials which are though not standardized for DSC, reveal a good agreement with both the measured data and the results of independent experiments reported by several other investigators. The main advantage of the model consists in the detailed analysis and separation or quantification of particular heat evolving/consuming mechanisms in both the DSC device and the studied materials. Therefore, contrary to the empirical calibration, it can identify exactly the physical sources of measurement uncertainties. The raw experimental data provided by the DSC device can then be corrected in a straightforward way and the systematic errors can be eliminated.

Název v anglickém jazyce

Heat transport and storage processes in differential scanning calorimeter: Computational analysis and model validation

Popis výsledku anglicky

Experimental results provided by differential scanning calorimetry (DSC) can be affected by systematic errors, which are difficult to identify and quantify correctly by the end-users, as a DSC device is commonly used as a gray box. The signal delay due to thermal inertia and the effects of sample size or heating rate present the most common sources of uncertainties. In this paper, a 3-D computational model of a differential scanning calorimeter is constructed, calibrated and validated. Five reference standards are used for both experimental and computational calibration, resulting in a very good agreement (R2 > 0.999794) of the computational model with experimental outputs. Model is validated using two different materials and processes. The analysis of melting of aluminum, as one of the standards not used at the calibration, shows a maximum difference of 0.279 mW.mg-1 at the peak top, which is well within the accuracy limits. The application of the model for the determination of effective specific heat capacity of quartz, as a representative of commonly studied materials which are though not standardized for DSC, reveal a good agreement with both the measured data and the results of independent experiments reported by several other investigators. The main advantage of the model consists in the detailed analysis and separation or quantification of particular heat evolving/consuming mechanisms in both the DSC device and the studied materials. Therefore, contrary to the empirical calibration, it can identify exactly the physical sources of measurement uncertainties. The raw experimental data provided by the DSC device can then be corrected in a straightforward way and the systematic errors can be eliminated.

Druh

J_imp - Článek v periodiku v databázi Web of Science

CEP obor

—

OECD FORD obor

20501 - Materials engineering

Projekt

<a href="/cs/project/GA17-01365S" target="_blank" >GA17-01365S: Modelování a experimentální ověření vlivu zmrazovacích cyklů na degradaci porézních stavebních materiálů</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2019

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

International Journal of Heat and Mass Transfer

ISSN

0017-9310

e-ISSN

1879-2189

Svazek periodika

136

Číslo periodika v rámci svazku

June

Stát vydavatele periodika

US - Spojené státy americké

Počet stran výsledku

10

Strana od-do

355-364

Kód UT WoS článku

000467195600028

EID výsledku v databázi Scopus

2-s2.0-85062447287