Study of gypsum composites with fine solid aggregates at elevated temperatures

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F68407700%3A21110%2F21%3A00350248" target="_blank" >RIV/68407700:21110/21:00350248 - isvavai.cz</a>

Výsledek na webu

<a href="https://doi.org/10.1515/secm-2021-0025" target="_blank" >https://doi.org/10.1515/secm-2021-0025</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.1515/secm-2021-0025" target="_blank" >10.1515/secm-2021-0025</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Study of gypsum composites with fine solid aggregates at elevated temperatures

Popis výsledku v původním jazyce

The structure and behaviour of two gypsum composites after exposition to elevated temperatures were investigated. The silica sand and fine basalt aggregate were used as solid fillers. The changes in structure and composition at temperatures from 50 to 1,000°C were investigated by scanning electron microscopy and X-ray diffraction together with the size and strength of the samples and their pore size distribution. The structure of gypsum matrix changed significantly at 1,000°C in both composites, while the aggregate particles were not changed. It was found that even if the silica sand is considered as less suitable filler at high temperatures because of its volume changes, the gypsum with sand performed better than gypsum with basalt at the highest temperatures, because the shrinkage of the gypsum matrix was compensated by the increase in the volume of aggregate. The final volume change at 1,000°C was 3.5% in composite with silica sand and 6.8% in composite with basalt. The residual compressive strength of both composites was about 9.4%. No cracks appeared in the samples and no spalling was observed

Název v anglickém jazyce

Study of gypsum composites with fine solid aggregates at elevated temperatures

Popis výsledku anglicky

The structure and behaviour of two gypsum composites after exposition to elevated temperatures were investigated. The silica sand and fine basalt aggregate were used as solid fillers. The changes in structure and composition at temperatures from 50 to 1,000°C were investigated by scanning electron microscopy and X-ray diffraction together with the size and strength of the samples and their pore size distribution. The structure of gypsum matrix changed significantly at 1,000°C in both composites, while the aggregate particles were not changed. It was found that even if the silica sand is considered as less suitable filler at high temperatures because of its volume changes, the gypsum with sand performed better than gypsum with basalt at the highest temperatures, because the shrinkage of the gypsum matrix was compensated by the increase in the volume of aggregate. The final volume change at 1,000°C was 3.5% in composite with silica sand and 6.8% in composite with basalt. The residual compressive strength of both composites was about 9.4%. No cracks appeared in the samples and no spalling was observed

Druh

J_imp - Článek v periodiku v databázi Web of Science

CEP obor

—

OECD FORD obor

20102 - Construction engineering, Municipal and structural engineering

Projekt

<a href="/cs/project/GA19-08605S" target="_blank" >GA19-08605S: Vliv plniv na strukturu a vlastnosti síranovápenatých kompozitů</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2021

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Science and Engineering of Composite Materials

ISSN

0792-1233

e-ISSN

2191-0359

Svazek periodika

28

Číslo periodika v rámci svazku

1

Stát vydavatele periodika

US - Spojené státy americké

Počet stran výsledku

12

Strana od-do

237-248

Kód UT WoS článku

000667955500001

EID výsledku v databázi Scopus

2-s2.0-85106552808