Influence of Elevated Temperature on the Mechanical Properties of Transparent Adhesive Glass-Glass Joints

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F68407700%3A21110%2F22%3A00358614" target="_blank" >RIV/68407700:21110/22:00358614 - isvavai.cz</a>

Výsledek na webu

<a href="https://doi.org/10.47982/cgc.8.439" target="_blank" >https://doi.org/10.47982/cgc.8.439</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.47982/cgc.8.439" target="_blank" >10.47982/cgc.8.439</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Influence of Elevated Temperature on the Mechanical Properties of Transparent Adhesive Glass-Glass Joints

Popis výsledku v původním jazyce

Glass is an attractive, transparent but brittle material which is increasingly popular in civil engineering. Not only small and secondary glass structures such as canopies or railings, but also load-bearing structures or structural elements such as stairways, beams, facades, etc. are commonly designed today. The wider use of glass places demands on the connections of glass-to-glass or glass-to-other materials. Mechanical connections are commonly used owing to their known mechanical properties but there is pressure to use adhesives for their considerable advantages. Unfortunately, there is not enough information about the mechanical properties of adhesives exposed to environmental effects and elevated temperature. The paper is focused on experimental testing of glass-to-glass connection using transparent adhesives. The specimens were prepared as double-lap shear joints with 1 mm adhesive joint thickness. In the study, three two-component epoxy adhesives were selected, one rigid adhesive and two semi-rigid adhesives. Specimens were tested at room temperature (reference set) and at elevated temperature (80 °C), six sets of specimens were prepared in total. The test was controlled by displacement with continuous loading until the specimen’s collapse. The cross-head speed was 0.05 mm/min. Shear strength at failure rapidly decreased for specimens exposed to elevated temperature and each specimen failed due to loss of adhesion between adhesive and glass.

Název v anglickém jazyce

Influence of Elevated Temperature on the Mechanical Properties of Transparent Adhesive Glass-Glass Joints

Popis výsledku anglicky

Glass is an attractive, transparent but brittle material which is increasingly popular in civil engineering. Not only small and secondary glass structures such as canopies or railings, but also load-bearing structures or structural elements such as stairways, beams, facades, etc. are commonly designed today. The wider use of glass places demands on the connections of glass-to-glass or glass-to-other materials. Mechanical connections are commonly used owing to their known mechanical properties but there is pressure to use adhesives for their considerable advantages. Unfortunately, there is not enough information about the mechanical properties of adhesives exposed to environmental effects and elevated temperature. The paper is focused on experimental testing of glass-to-glass connection using transparent adhesives. The specimens were prepared as double-lap shear joints with 1 mm adhesive joint thickness. In the study, three two-component epoxy adhesives were selected, one rigid adhesive and two semi-rigid adhesives. Specimens were tested at room temperature (reference set) and at elevated temperature (80 °C), six sets of specimens were prepared in total. The test was controlled by displacement with continuous loading until the specimen’s collapse. The cross-head speed was 0.05 mm/min. Shear strength at failure rapidly decreased for specimens exposed to elevated temperature and each specimen failed due to loss of adhesion between adhesive and glass.

Druh

D - Stať ve sborníku

CEP obor

—

OECD FORD obor

20101 - Civil engineering

Projekt

<a href="/cs/project/GA18-10907S" target="_blank" >GA18-10907S: Mechanické vlastnosti polymerních lepených spojů pro aplikace ve stavebnictví s ohledem na působení okolního prostředí a stárnutí</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2022

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

Challenging Glass 8 - Conference on Architectural and Structural Applications of Glass

ISBN

—

ISSN

2589-8019

e-ISSN

2589-8019

Počet stran výsledku

8

Strana od-do

—

Název nakladatele

Delft University of Technology (TU Delft)

Místo vydání

Delft

Místo konání akce

Ghent University

Datum konání akce

23. 6. 2022

Typ akce podle státní příslušnosti

WRD - Celosvětová akce

Kód UT WoS článku

—