ADHESION TEST – TESTING OF SELECTED ADHESIVES ON FIRED CLAY

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F68407700%3A21110%2F22%3A00359751" target="_blank" >RIV/68407700:21110/22:00359751 - isvavai.cz</a>

Výsledek na webu

<a href="http://dx.doi.org/10.14311/APP.2022.34.0085" target="_blank" >http://dx.doi.org/10.14311/APP.2022.34.0085</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.14311/APP.2022.34.0085" target="_blank" >10.14311/APP.2022.34.0085</a>

Jazyk výsledku

angličtina

Název v původním jazyce

ADHESION TEST – TESTING OF SELECTED ADHESIVES ON FIRED CLAY

Popis výsledku v původním jazyce

The following paper deals with the comparison of adhesion of specimens made of fired clayand selected adhesives. The adhesion was tested on specimens at the age of one, two and three days inorder to determine the parameters of young masonry. Nine different adhesives (adhesives intended formasonry and adhesives for others material) were tested in total. The above mentioned test is not standardized. The obtained results from the adhesion testdetermine the tensile strength between the adhesive and the fired clay and the adhesion of selectedadhesive to the fired clay. The small specimens were made of two ceramic plates and an adhesive.Selected adhesives were applied to ceramic plates according to the usual standards. Eighty-one smallspecimens were produced in total – twenty-seven specimens for the adhesion test at each defined age ofthe specimens (one day, two days, three days). The produced specimens were cured in the climaticchamber with set laboratory conditions until the time of the test. The specimens were tested inthe laboratory of the Heluz brick plant in Dolní Bukovsko. This paper deals with the procedure ofpreparation of the specimens, the course of the test and the comparison of gained results.

Název v anglickém jazyce

ADHESION TEST – TESTING OF SELECTED ADHESIVES ON FIRED CLAY

Popis výsledku anglicky

The following paper deals with the comparison of adhesion of specimens made of fired clayand selected adhesives. The adhesion was tested on specimens at the age of one, two and three days inorder to determine the parameters of young masonry. Nine different adhesives (adhesives intended formasonry and adhesives for others material) were tested in total. The above mentioned test is not standardized. The obtained results from the adhesion testdetermine the tensile strength between the adhesive and the fired clay and the adhesion of selectedadhesive to the fired clay. The small specimens were made of two ceramic plates and an adhesive.Selected adhesives were applied to ceramic plates according to the usual standards. Eighty-one smallspecimens were produced in total – twenty-seven specimens for the adhesion test at each defined age ofthe specimens (one day, two days, three days). The produced specimens were cured in the climaticchamber with set laboratory conditions until the time of the test. The specimens were tested inthe laboratory of the Heluz brick plant in Dolní Bukovsko. This paper deals with the procedure ofpreparation of the specimens, the course of the test and the comparison of gained results.

Druh

D - Stať ve sborníku

CEP obor

—

OECD FORD obor

20504 - Ceramics

Projekt

—

Návaznosti

S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2022

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

NMM 2021 Nano & Macro Mechanics

ISBN

978-80-01-06976-9

ISSN

—

e-ISSN

2336-5382

Počet stran výsledku

9

Strana od-do

85-93

Název nakladatele

České vysoké učení technické v Praze

Místo vydání

Praha

Místo konání akce

Praha

Datum konání akce

16. 9. 2021

Typ akce podle státní příslušnosti

WRD - Celosvětová akce

Kód UT WoS článku

—